Hotpoint FFA80 User Manual

Page of 28
FRIDGE FREEZER - MODELS FFA80, FFA70, FFS70 & FFA60
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
To ensure that your fridge freezer runs reliably and efficiently follow these steps.
SAFET
Y &
INST
ALL
A
TION
C
ONTR
OLS
USEFUL AD
VICE
CLEANING &
MAINTENANCE
SER
VICE  &
GU
AR
ANTEE
TR
OUBLESHOO
TING
Read the rest of these instructions to get the best from your appliance 
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
Choose a location for your
fridge freezer, away from
any heat sources and
allow adequate
ventilation - 100mm 
(4 inch) gap above.
Level the fridge freezer by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.
Before plugging in and
switching on, leave the
fridge freezer in its final 
location for at least 15
minutes to allow it to 
settle.
If you are freezing fresh
food, turn on fast freeze
by pressing the switch 24
hours before placing the
food inside.
Place the fresh food
inside.
Move the fridge freezer
into position, using the
sides of the cabinet.
Take care to avoid
damaging the refrigerant
circuit pipe work on the
rear.
Plug in and switch on.
Allow the fridge freezer to
cool before placing food
inside.
The high temperature
light will stay on until the
fridge freezer has cooled
down.
All food in the fridge
freezer  should be
covered.
STEP 1
STEP 2
After the front feet have
been adjusted and the
fridge freezer is level fit
the left and right hand
bottom hinge covers
supplied.
Align with the cover plate
slots and push into
position.
STEP 4
STEP 3
STEP 5
STEP 6
STEP 7
Your fridge freezer is now
working.
If after 24 hours your
fridge freezer is not
operating as you want,
refer to the
Troubleshooting section.
STEP 8
NB. The spanner is for illustration
only and is not supplied with the
fridge freezer.
Remember to turn fast freeze off
after 24 hours, however if you
forget to do so it will automatically
cancel after 48 hours.