Fujitsu Primergy RX300S3 VFY:R3003SX020IN Leaflet

Product codes

VFY:R3003SX020IN

Data sheet

⏐ Issue: April 04, 2008⏐ PRIMERGY RX300 S3

Page 2 / 2

Type

Dual Socket Rack Server

System board

D 2119

Chip set

Intel® 5000P

Processors

Dual- or Quad-Core Intel® Xeon® (1 - 2)

Frequencies (GHz)

5050 (3.00) / 5060 (3.20), 5080 (3.73), 5110
(1.60), 5120 (1.86) / 5130 (2.00), 5140 (2.33),
5148 (2.33) 40W, 5150 (2.66), 5160 (3.00) Dual-
Core or L5310 (1.60) 50W; E5310 (1.60), L5320
(1.86) 50W, E5320 (1.86), L5335 (2.00) 50W
E5335 (2.00), E5345 (2.33), X5355 (2.66),
X5365 (3.00) Quad-Core

Front-Side-Bus

667, 1066, 1333 MHz / also 1066 (5310/20)

Second-Level-Cache 2x 2 (50xx) / 4 (51xx), 2x 4 MB (53xx), ECC
Memory

1 Gbyte up to max. 32 Gbyte

4-way interleaved, FullyBuffered DIMM DDR2 FBD667; ECC; 8 slots
divided into 2 branches with 2 channels each for PC2-5300F modules with
512, 1, 2 and 4 GB; SDDC, Memory Mirroring option

Flash-EPROM
Local BIOS update with floppy disk; Remote BIOS-Update via LAN
with Global Flash and service partition
Interfaces
Serial

1x RS-232-C (9-pin) (usable for iRMC
or system)

Serial (option)

1x RS-232-C (9-pin) occupies PCI-slot 1

Parallel (option)

Centronics, 25-pin, EPP/ECP comp.
(occupies PCI-slot 5)

Keyboard, Mouse

2x PS/2

USB 2.0

2x front, 2x back; (OHCI, 480 Mbit/s)
1x internal for backup drives

Graphics

1x VGA (15-pin)

LAN

2x RJ45

Front Panel

On/off switch; NMI-, reset button; LEDs for system status (amber), identification
(blue), hard disks access (green), power (amber/green); (back: system status,
identification)

Onboard controller

IDE (ATA100)

for 1 x CD / DVD (integr. in Southbridge)

SAS (Brockton)
also useable for
SATA

8-Port SAS controller with integrated RAID
(0, 1, 1E).(Integrated Mirroring Enhanced
also for odd numbered HD´s for Windows
and Linux).

MegaRaid PCI
Express™
RoMB (option)
(in 2.5-inch base
unit mandatory)

RAID Level 0, 1, 10, 5, 50 extension for
onboard SAS RAID-controller with iButton
(enable key) and 256MB Cache or 256MB
iTBBU (Cache with integrated BBU).

SAS and

SATA are supported, no simultaneous operation
of SAS and SATA

LAN
(BroadCom5715)

2x 10/100/1000 Mbit/s Ethernet
(PCE-Boot via LAN from PXE server)

Server management

Integrated Remote Management Controller
(iRMC) incl. graphics controller, IPMI 2.0
compatible

Hard disk drives
(all hot-plug)

36, 73, 146, 300 Gbyte 3.5-inch SAS or
80, 160, 250, 500 Gbyte 3.5-inch SATA or
36, 73, 146 Gbyte 2.5-inch SAS optional (no
later conversion 3.5 to 2.5-inch)

1 Gbyte equals one billion bytes when referring to hard disk drive capacity; accessible
capacity may vary.

I/O Slots (Standard)

1x PCIe x8 Low Profile
2x PCIe x4 Low Profile, Hot-plug
2 x PCI-X 64-bit / 133 MHz, low profile; 3.3 V

I/O Slots (risercard option)

1 x PCI-X 64-bit / 133 MHz, long, full height;
2 x PCI-X 64-bit / 133 MHz, short, full height

Drive bays

for hard disks

6x 3,5/1-inch, for SAS / SATA or
12x 2,5/1-inch for SAS optional

for accessible drives

1x 5,25/0,5-inch, for IDE-CD or DVD-ROM opt.
1x 3.5/0.5-inch for opt. LocalView Display or FD

System fan units (hot-plug)
Standard / redundant (option): 1 + 1 units, 4 fans each

Electrical values
1x Hot-plug power supply unit as standard.
Additional hot-plug unit for redundancy option
Output power

600 W / 1 + 1 x 600 W each

Rated voltage range

100 - 240 V

Rated frequency

50-60 Hz

Max. rated current

100 V - 240 V / 8.5 A – 3.8 A

Rated current in basic
configuration

100 V - 240 V / 4.2 A - 1.4 A

Active power

681 W

Apparent power

689 VA

Heat emission

2452 kJ/h (2324 btu/h)

Temperature/Noise/Dimensions/Weight
Ambient temperature

10°C - 35°C (DIN IEC 721-3-3) class
3K2

Declared noise emission
according to ISO 9296

idle* operating* (*ISO 7779)

WAd

(1 B = 10 dB)

6.7 B 7.1 B

pAm

(bystander position)

53 dB 56 dB

Overall measures

85.9 * 482.6 * 785 (mm); (HxWxD)

Rack mount depth / U:
Rack cable depth:

745 mm / 2 U,
100 mm (900mm Rack recommended)

Rack integration kit

inclusive telescopic rails as part of the
standard delivery

Weight

~ 25 kg (configuration dependent)

Compliance with Norms and Standards
Product safety
Global / Europe

IEC 60950-1 / EN 60950-1

USA

UL 60950 3rd. Ed.

Canada

CAN/CSA-C22.2 No. 60950-1

Electromagnetic compatibility

This product and the released accessories, are in compliance with
emission class A. In certain cases measures have to be taken to
reduce the electro magnetic influence to other equipment.

Europe

EN 55 022 class A, EN 55024,
EN 61000-3-2 / -3-3

Taiwan / Japan

BSMI class A; VCCI class A /JEIDA

Australia / New Zealand

C-Tick class A

USA / Canada

FCC class A

Declaration of conformity
Europe (CE)

89/336/EEC(EMV);73/23 EEC(LVD)

North America

FCC class A

Approvals
Product safety
Global / Europe

CB / CE

USA / Canada

CSA

/ CSA

There is general compliance with the safety requirements of all
European countries and North America. National approvals
required in order to satisfy statutory regulations or for other
reasons, can be applied for on request.

Supported server operating systems
See actual release status

operating systems

: e.g. Windows Server

2003; Novell SUSE Linux Enterprise Server , Red Hat Enterprise
Linux; VMware ESX (Support of Debian, Ubuntu, Mandriva Linux
and other Linux derivatives

on demand

)

** For supported controllers (onboard and PCI cards for SCSI,
RAID, LAN, WAN, etc.), please refer to the corresponding system
configurator.
Server Management (see separate data sheets)
Standard:

PRIMERGY ServerView Suite;
PDA, ASR&R

Optional:

LocalView, RemoteView,
iRMC Advanced Pack

All rights, including rights created by patent grant or registration of a utility model or design as well
as rights of technical modifications are reserved. Delivery subject to availability. Designations may
be trademarks, the use of which by third parties for their own purposes may violate the rights of the
trademark owners.

Copyright

Published by

Fujitsu Siemens Computers
http://www.fujitsu-siemens.com/

Company stamp