Smeg 142306 User Manual

   

142306

Instructions for Use

42

•  Before connecting the appliance to the mains

supply, leave it stand for about 2 hours, which
will reduce a possibility of malfunctions in the
cooling system due to transport handling.

•  Clean the appliance, and be thorough,

especially in the interior (See Cleaning and
Maintenance).

•  In case the interior accessories are not

correctly placed, rearrange them as described
in chapter "Description of the Appliance".

These instructions for use are intended for the
user. They describe the appliance and its correct
and safe use. They were prepared for various
types/models of refrigerators therefore you may
find in it description of some functions and
accesories that your appliance does not have.

•  Our products use environmentally friendly

packaging, which can be either recycled or
disposed of in an environmentally friendly
manner. To this end, individual packaging
materials are clearly marked.

•  These instructions are printed either on

recycled paper or chlorine free bleached paper.

•  When your appliance finally wears out, please

try not to burden the environment with it; call
your nearest authorised service agent. (See
Disposing of the Worn Out Appliance)

•  Try not to open the door too often, especially

when the weather is wet and hot. Once you
open the door, mind to close it as soon as
possible. This is especially important if you
have an upright model.

•  Every now and then check if the appliance is

sufficiently ventilated (adequate air circulation
behind the appliance).

•  Set thermostat from higher to lower settings as

soon as possible (depends on how loaded the
appliance is, ambient temperature etc).

•  Before loading the appliance with packages of

fresh foods, make sure they are cooled to
ambient temperature.

•  Ice and frost layer increase energy

consumption, so do clean the appliance as
soon as the layer is 3-5 mm thick.

•  If the gasket is damaged or if it turns out that

the sealing is poor, the energy consumption is

substantially higher. To restore efficiency,
replace the gasket.

•  The condenser on the rear wall should be

always clean, free of dust or any impurities.

•  Always consider instructions stated in sections

Positioning and Energy Saving Tips, otherwise
the energy consumption is substantially higher.