Pelco C2616M (6 User Manual

C2616M (6/06)

Preparing the Unit to Install the Drive

1. Turn off power to the DX4000, and then remove the power cord from the unit.

Remove all nine screws from the DVR — three screws on each side and three on the top. Set aside the screws.

Figure 4.

Removing the Screws

Slide the top cover back and lift it up.

Figure 5.

Removing the Top Cover

WARNING:

The chassis assembly includes parts with sharp edges. To avoid injury, use caution

when handling the DX4000 chassis or components.

REMOVE
SCREWS