Sub-Zero 315W User Manual

S U B - Z E R O  

O P E R A T I O N

W I N E   S H E L F   R E M O V A L

To remove a wine shelf, pull the shelf out to its
full extension, gently and evenly lift up on both
sides of the front of the shelf and remove.
Reverse the procedure to reinstall the shelf.

IMPORTANT NOTE: Wine shelf removal will
be more difficult if the door cannot open to a
minimum of 120˚, as in a corner application.

R E P L A C E M E N T

The light bulb located in the top of the cabinet
will last for a long time, however when it does
fail or burn out, it can be replaced. Replace-
ment bulbs (part #12288801) are available from
your Sub-Zero authorized service center.

To replace the light bulb, unplug the unit.
Remove the top wine shelf. Pull the plug from
the socket in the top of the unit as shown in
the illustration below. Remove the bulb from
its holder and install the new bulb. 

S H E L V E S

Model 315W has roller-assembly shelves with
a full three-quarter extension for easy access
to wine bottles. Each wine shelf holds four
(750 ml) bottles. An additional two (750 ml)
bottles may be placed on the bottom station-
ary shelf for a total capacity of 26 bottles. Refer
to the illustration below.

IMPORTANT NOTE: Never keep anything
other than wine bottles on the wine shelves;
smaller beverage bottles are unstable and may
easily fall out and break. 

The shelves have a solid natural cherry wood
facing that can be replaced with other wood to
match your cabinetry. Details on how to
replace the shelves’ wood facing can be found
in the Sub-Zero Design Guide. Check our
website at subzero.com.

IMPORTANT NOTE: If you choose to stain or
seal the shelves’ natural cherry wood facing,
be aware that some of these substances are
hazardous and will damage wine.

D E S I G N
G U I D E

LIGHT BULB

SOCKET