Shindaiwa 81188 User Manual

6

1.  Insert the cutting attachment shield 

between the outer tube and the cutting 

attachment mounting plate. 

See Figure 9.

 

  WARNING!

NEVER operate the unit without the 

cutting attachment shield installed 

and tightly secured!

CAUTION!
Make sure the clamp screw and 

retaining nut are securely tightened 

before tightening the four socket-head 

cap screws

NOTE:

It may be necessary to loosen the retaining 

nut and clamp screw to adjust cutting attach-

ment shield mounting plate.

2.  Fit the two shims and the bracket over 

the outer tube and loosely install the 

four socket-head screws. See Figure 9.

3.  Tighten the four socket-head cap screws 

to secure the cutting attachment shield.

Assembly

1.  Attach the shield extension to the  

cutting attachment shield. See figure 9B.

 

  WARNING!

NEVER use  this machine without 

sub-shield when using a trimmer 

head.

CAUTION!
Make sure the sub-guard is  

completely hooked at the hook  

receiver.