Yamaha HTR-5640 User Manual

Recording adjustments and other operations are
performed on other recording components. Refer to the
operation instructions for these components for details on
their operation.

1

2

3

4

• Do a test recording before you start an actual recording.
• When this unit is set in standby mode, you cannot record

between the components connected to it.

• DSP programs and volume, bass, and treble settings do not

affected the recorded material.

• You cannot record from a  source connected to the 6CH

INPUT jacks on this unit.

• Input sources are not output to the same OUT (REC) channel.

(For example, the signal input from VCR IN is not output to
VCR OUT.)

• This unit’s DIGITAL OUTPUT jack and analog OUT(REC)

jacks are independent. To record a source using a digital
recording component connected to the DIGITAL OUTPUT
jack, connect the source component to one of the DIGITAL
INPUT jacks.

• Check the copyright laws in your country if you wish to

record from records, CDs, radio, etc. Recording of
copyrighted material may infringe copyright laws.

If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.

■ Special considerations when recording

The DTS signal is a digital bitstream. Attempting to
digitally record the DTS bitstream will result in noise
being recorded. Therefore, if you want to use this unit to
record sources that have DTS signals recorded on them,
the following considerations and adjustments need to be
made.

For LDs, DVDs and CDs encoded with DTS, follow the
operating instructions of your player to set it to output an
analog signal, if it is compatible with the DTS format.

0107HTR5650/5640_32-37_EN-U.P65

02.12.24, 9:46 AM

37