GE 49-60637 Data Sheet

10

The larger refrigerator door bins and freezer

tilt-out door bins are adjustable. 

Lift the front of  the bin straight up,

then lift up and out.

Engage the back side of

the bin in the molded supports on the door.

Then push down on the front of  the bin. Bin

will lock in place.

Lift the front of  the bin straight up

then out.

Position the bin above the

rectangular molded supports on the door. Then

slide the bin down onto the support to lock it in

place.

helps prevent tipping, spilling 

or sliding of  small items stored on the door

shelf. Place a finger on either side of  the

snugger near the rear and move it back 

and forth to fit your needs.

Snugger

This shelf  splits in half  and slides under itself

for storage of  tall items on the shelf  below.
This shelf  can be removed and replaced 

or relocated just like Slide-Out Spillproof

Shelves.
On some models, this shelf  cannot be used in

the lowest position.

The slide-out spillproof  shelf  allows you 

to reach items stored behind others. The special

edges are designed to help prevent spills from

dripping to lower shelves. 

To remove:
Slide the shelf  out until it reaches the stop, then

press down on the tab and slide the shelf

straight out.

To replace or relocate:
Line the shelf  up with the supports and slide it

into place. The shelf  can be repositioned when

the door is at 90° or more. To reposition the

shelf, slide the shelf  past the stops and angle

downward. Slide shelf  down to the desired

position, line up with the supports and slide into

place.