Dometic RM2193 User Manual

6. CLEARANCES

Minimum clearances in inches to combustible materials
are:

Top

Side

Bottom

Rear

See NOTE

NOTE

NOTE: Clearance "M

M" is between the rearmost part of

the refrigerator and the wall behind the refrigerator.

NOTE

NOTE: Clearance "N

N" is the distance between the

bottom of the lower vent to the top of upper side vent.
For ventilation height, refer to

Section A. Installation,

Item 5. Ventilation Heights

. See FIG. 2.

Surfaces directly above and sides adjacent to the

Surfaces directly above and sides adjacent to the
flue outlet must be of, or covered with, fireproof

flue outlet must be of, or covered with, fireproof

flue outlet must be of, or covered with, fireproof
material. See FIG. 2.

material. See FIG. 2.

NOTE

NOTE: Clearance "P"

"P"

"P" over top of unit condenser fins

is 1/4 inch. This is the minimum height which can be
allowed over the condenser fins. Whenever possible,
increase this height by up to 11 inches; the more
ventilation you provide, the better the performance you
can expect from the refrigerator.

Minimum Ventilation
Heights In:

5. VENTILATION HEIGHTS

Refer to FIG 1 & FIG. 1A., Pages 2 & 3

Installation with upper side

Installation with upper side
vent and lower side vent

vent and lower side vent

REFRIGERATOR

INCHES

*Min. Max. *Min. Max.

RM2191, RM2193

20-5/8 31-5/8 524 803

* This is the minimum height allowable. Where
possible, increase the minimum height by 11
inches (279mm) for a better air flow and cooling
performance.

FIG. 1A

FIG. 2