Electrolux S 64140 TK User Manual

Installation

9

For correct operation this

appliance must be located in a

dry atmosphere, away from

heatsources, e.g. cookers,

radiators, boilers and direct

sunlight.
You should also ensure that air

can circulate freely around the

back and the top of the

cabinet. There should be

100mm (4”) between the top of

the cabinet and any

overhanging kitchen furniture.
Alternatively allow 50mm (2”) between the top of the cabinet and any

overhanging kitchen furniture and a gap of 25mm (1”) on either side of the

appliance.
If your refrigerator is installed

under a continuous worktop, an

air outlet opening of at least

200 cm

2 

and a ventilation grille

(A/B) matching the worktop

design should be installed at

the rear of the worktop. The cut

surfaces of the worktop (C)

should be varnished to avoid

swelling due to penetration of

moisture. The appliance wall

distance must beat least 30 mm

and should be checked before

the ventilation grille is inserted.

After the worktop has been

removed the appliance can be

installed underneath a

continuous worktop. The

procedure is as follows:

1.Unscrew the screws (1) on the

right and the left.

2. Lift the worktop slightly, push it

about 20 mm towards the rear,

and lift it off upwards (2).

Unscrew the holding bracket (3)

and keep it in a safe place (4).