Delfield SPRF-68W Leaflet

Project  __________________________

Item ____________________________

Quantity  _________________________

CSI Section 11400

980 S. Isabella Road
Mt. Pleasant, MI 48858
www.delfield.com

Phone: 800-733-8948
Fax: 800-669-0619
Email: info@delfield.com

Approval _________________

Date ____________________

❑ 

68” length, refrigerator/freezer module, 34” height, 35” depth

•  14-gauge stainless steel top standard
•  34” counter height, 35” depth
•  Two separate systems, one section refrigerator and 

one section freezer

•  9’ long cord and plug are supplied standard
•  18-gauge stainless steel exterior standard
•  Electrical: 120 volt, 60 cycle, single phase
•  R134A refrigerant-refrigerator, R404A-freezer
•  Removable sliding lids (two per unit) standard
•   Standard on 5” diameter polyurethane swivel casters
•  Stainless steel fully retractable interlock provided as 

standard

•   Basket rack system is standard
•  A wide selection of laminate colors available at no 

additional charge

•   Laminate selection has 18-gauge galvanized base, 

16-gauge coved corner supports to protect laminate

•   Meets NSF2, NSF7, UL and CEC standards
•  One-year parts and 90 day labor standard warranty.  

Additional warranties available

•  Holds baskets size, 13.25” x 26.13” x 2.5” or 
 

13.25” x 26.13” 4.75”

OPTIONS AND ACCESSORIES
❑ 

Single tier merchandiser (Unheated)

❑ 

Double tier merchandiser (Unheated)

❑ 

16”x35” Stainless steel drop tray shelf

❑ 

Stainless steel cash shelf

❑

  Tray slides

 

• V-style

 

• Tubular bar

❑

  2” Wire basket (13.25”x26.13”x2.5”)

❑

  4” Wire basket (13.25”x26.13”x4.75”)

❑

  Decal package

❑

  Canopy

Exterior: Exterior body is constructed of 18-gauge 

stainless steel side panels or 18-gauge galvanized 
reinforced laminate panels. 14-gauge galvanized bottom.  
All exterior side panels are reinforced with overlapping 
corners and are welded in place.  All insert cutouts are 
reinforced with 14-gauge galvanized channel supports.

Exterior top is constructed of 14-gauge stainless steel, 
welded, ground and polished into one integral unit.  Top is 
fabricated with square exterior corners with fully hemmed 
nosing on all sides.  Stainless steel fully retractable 
interlocks are installed on opposing corners and locks units 
into a complete serving system.

Interior, Refrigerated Section: Refrigerated cold 

pan is 14” deep one-piece constructed stainless steel 
tank.  Louvered front and rear sides are for re-circulated 
forced air-cooling.  The tank is separated from the top 
by a polycarbonate  thermal break and is fully insulated 
with foamed in place high-density polyurethane foam.  A 
stainless steel access panel is located in bottom of tank, 
allowing complete access to the evaporator coil and fan 
package.
On/Off switch is located on the operator side in a recessed 
panel with a hinged cover plate.  Refrigerated tank 
maintains NSF7 temperature requirements.

Interior, Freezer Section: Freezer cold pan is 13” 

deep one-piece constructed stainless steel tank.  Unit is 
cold wall constructed.  The tank is separated from the top 
by a polycarbonate  thermal break and is fully insulated 
with foamed in place high-density polyurethane foam.  A 
stainless steel access panel is located in bottom of tank, 
allowing complete access to the evaporator coil and fan 
package.
On/Off switch is located on the operator side in a recessed 
panel with a hinged cover plate.  Freezer tank maintains 0˚ 
to -5˚ temperature with lids closed for storage.

Lid: Lids are constructed of stainless steel and are foamed 

with polyurethane insulation.  The lid thickness is 3/4”.  Lid 
handle shall be black, recessed ABS.  Lids are removable 
without the use of tools. 
 Stainless steel lid locking bar is standard.  Bar has locking 
handle at one end and mounts to clips, which are bolted to 
the top of the cabinet.  The locking bar extends the length 
of the unit.  Entire assembly can be removed during the 
serving period.

Refrigeration Section:  Refrigeration system uses 

R134A refrigerant and has a self-contained 120 volt, 60 
Hertz, single phase hermetically sealed condensing unit.  

The system utilizes and evaporator coil and fan package 
for re-circulated forced air-cooling of product.  Unit is 
supplied with an expansion valve and hot gas condensate 
evaporator.

Freezer Section:  Refrigeration system uses R404A 

refrigerant and has a self-contained 120 volt, 60 Hertz, 
single phase hermetically sealed condensing unit.  Unit is 
supplied with an expansion valve.

Electrical: Electrical connections shall be 120 volt, 60 

Hertz, single  phase.  Unit shall have a 9’ long electrical 
cord and NEMA 5-20P plug.  Cord is standard on the 
operator right side of equipment.  Double cord hook is 
located on the bottom of the unit.

Casters: Unit is mounted on 5” (12.7cm) diameter swivel 

polyurethane casters with non-marking tires and plate 
brakes.  Casters are bolted directly to the 14-gauge bottom 
of the base.  Overall height of caster assembly is 6.00” 
(15.2cm).

Styling: Units are standard with 18-gauge stainless steel 

exterior sides.  Laminate is an option available at no 
additional charge.  Decal packages and canopies are also 
available.