Delfield SSR1N-G Leaflet

Page of 2
Project  __________________________________
Item  ____________________________________
Quantity   ________________________________
CSI Section 11400
Approved   _______________________________
Date  ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Delfield
®
Exterior: SS and SA models shall have corrosion resistant stainless 
steel exterior cabinet sides, front and shroud. SM models shall have 
corrosion resistant aluminum on exterior cabinet sides and will have 
stainless front and shroud. All units shall have the upper shroud 
hinged with a gas assist stay open feature to provide easy access to 
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel 
(SS models) or heavy gauge aluminum (SA and SM models). Bottom 
and top surfaces shall be die stamped to provide radius corners and 
recessed floor. Three wire shelves are provided per section, SA/SS 
standard shelves are chrome plated, SM standard shelves are epoxy 
coated. Shelves rest on clips which are adjustable on 1” increments 
on stainless steel pilasters affixed to the cabinet interior. Pilasters are 
removable without tools for cleaning. Mounted to the interior ceiling, 
the interior fluorescent light is controlled automatically through a 
switch mounted in the hinge assembly to protect against breakage. 
Door openings are protected with heavy gauge stainless steel 
breaker strips. An air duct shall be mounted to the ceiling assuring 
low velocity, even air movement throughout the cabinet interior. 
Doors: Double paned tempered thermopane glass. Constructed with 
a combination of extruded aluminum and PVC. Each door has two 
edgemount, self-closing, cam lift style hinges. Doors can be removed 
from the cabinet without the use of tools. Door handle is continuous 
along vertical dimension of the door. Door gaskets are magnetic and 
mount to the door, snapping in place and removable with out tools. 
Keyed door lock is mounted to the door. Lock engages into a heavy 
duty strike mounted to the cabinet face.
Refrigeration system: All components are mounted to the exterior 
of the cabinet ceiling, outside the food zone and are assembled 
as one piece and can be removed as one piece. Environmentally 
friendly R404A refrigerant is used. The system has the capability 
of maintaining between 27ºF and 40ºF in heavy use food service 
operations. Refrigerant is metered using a highly responsive 
thermostatic expansion valve. System is controlled using Delfield’s 
ACT-Advanced Control Technology electronic temperature control, 
which provides improved pull down times, reduces compressor 
cycling and longer compressor life with lower energy consumption. 
Control system uses adaptive defrost to assure evaporator coil is free 
of ice and is operating at optimum efficiency. Evaporator condensate 
is eliminated using an energy efficient hot gas system.
Electrical: Standard electrical connections shall be 115V, 60 Hz single 
phase. A 10’ cord and plug is supplied and attached to a junction box 
mounted on the exterior top of the cabinet. 
Specifications
Standard Features
Options & 
Accessories
Stainless steel interior and exterior (SS)
Stainless steel exterior, aluminum interior (SA)
Aluminum interior and exterior, stainless front 
(SM)
Built in door locks with heavy duty strikes
Pressure relief valve is standard to prevent door 
vapor lock
Exterior digital thermometer with high/low 
temperature alarm
Easy to use electronic control
Easy access “flip up” shroud
Three wire shelves per section - SA/SS standard 
with chrome plated shelves and SM standard 
with epoxy coated shelves
10’ attached cord and plug
6” adjustable stainless steel legs
Stainless steel breaker strips
High density foamed in place environmentally 
friendly, Kyoto Protocol Compliant, Non ODP 
(Ozone Depletion Potential), Non GWP (Global 
Warming Potential) polyurethane keeps energy 
costs low
Energy savings door heater switch
Two year parts & labor warranty
Five year compressor warranty
One section 
Two section
SSR1N-G 
SSR2N-G 
Stainless exterior and interior glass full door
SSR1N-GH 
SSR2N-GH 
Stainless exterior and interior glass half door
SAR1N-G 
SAR2N-G 
Stainless exterior and aluminum interior glass full door
SAR1N-GH 
SAR2N-GH 
Stainless exterior and aluminum interior glass half door
SMR1N-G 
SMR2N-G 
Stainless front aluminum exterior and interior glass full door
SMR1N-GH 
SMR2N-GH 
Stainless front aluminum exterior and interior glass half door
Models
Specification Line®
Self-Contained Glass Door Narrow Reach-In Refrigerator
Sp
ec
ifi
ca
tio
n L
in
: G
las
s D
oo
r N
arr
ow
 R
ea
ch
-In
 R
efr
ig
era
to
r
Security (prison) package
Incandescent light
Door field rehingability
Additional shelves
Tray slides
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
230-50-1 electrical
220-60-1 electrical
SSR2N-G