Delfield SMDFP2-SH Leaflet

Exterior: SS and SA models shall have corrosion resistant stainless 

steel exterior cabinet sides, front and shroud. SM models shall have 

corrosion resistant aluminum on exterior cabinet sides and will have 

stainless front and shroud. All units shall have the upper shroud 

hinged with a gas assist stay open feature to provide easy access to 

the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel 

(SS models) or heavy gauge aluminum (SA and SM models). Bottom 

and top surfaces shall be die stamped to provide radius corners and 

recessed floor. Three wire shelves are provided per section, SA/SS 

standard shelves are chrome plated, SM standard shelves are epoxy 

coated. Shelves rest on clips which are adjustable on 1” increments 

on stainless steel pilasters affixed to the cabinet interior. Pilasters are 

removable without tools for cleaning. Mounted to the interior ceiling 

of each compartment, the interior incandescent lights are controlled 

automatically through a switch mounted in the hinge assembly to 

protect against breakage. Door openings are protected with heavy 

gauge stainless steel breaker strips. An air duct shall be mounted to 

the ceiling assuring low velocity, even air movement throughout the 

cabinet interior. 

Doors: Exterior shall be corrosion resistant stainless steel. Interior 

liner shall be resilient high impact ABS material formed to protrude 

beyond the door gasket to protect the gasket from tearing.  Each 

door has two edge mount, self closing, cam lift style hinges. Doors 

can be removed from the cabinet without the use of tools. Metal 

door handle shall be recessed into the door for easy grip without 

impacting aisle space. Keyed door lock is mounted in the door next 

to the handle. Lock engages into a heavy duty strike mounted to 

the cabinet face. Door gaskets are magnetic and mount to the door 

snapping in place and are removable without tools.

Refrigeration system:  Each compartment has its own separate 

refrigeration system. Condensing units are located on top of the 

cabinet, outside the food zone, behind the removable upper 

shroud. Evaporator coils are located inside the cabinet mounted 

to the interior ceiling of each compartment. Defrost is automatic. 

Condensate travels down a tube in the cabinet side wall to a 

receptacle mounted to the exterior bottom of the cabinet where it 

is evaporated with the aid of an electric heater. Each compartment’s 

temperature is individually monitored and controlled using Delfield’s 

ACT-Advanced Control Technology electronic temperature control, 

which provides improved pull down times, reduces compressor 

cycling and longer compressor life with lower energy consumption. 

Two exterior digital thermometers display temperature. Refrigerator 

compartment maintains between 27°F and 40°F. Freezer 

compartment maintains temperature between -5ºF and 0ºF. 

Electrical:  Unit comes with one 10’ cord and plug with single point 

connection to all cabinet and refrigeration system electronics. It 

is attached to a junction box mounted on the exterior top of the 

cabinet.

Specifications

Standard Features

Options & 
Accessories

Stainless steel interior and exterior (SS)
Stainless steel exterior, aluminum interior (SA)
Aluminum interior and exterior, stainless front 
(SM)
Built in door locks with heavy duty strikes
Recessed metal door handle
Pressure relief valve is standard to prevent door 
vapor lock
Two exterior digital thermometers with high/
low temperature alarm
Easy to use electronic control
Easy access “flip up” shroud
Three wire shelves per section - SA/SS standard 
with chrome plated shelves and SM standard 
with epoxy coated shelves
Tough ABS interior door liners
10’ attached cord and plug
6” adjustable stainless steel legs
Stainless steel breaker strips
High density foamed in place environmentally 
friendly, Kyoto Protocol Compliant, Non ODP 
(Ozone Depletion Potential), Non GWP (Global 
Warming Potential) polyurethane keeps energy 
costs low
Energy savings door heater switch
Two year parts & labor warranty
Five year compressor warranty

•
•
•

•
•
•

•

•
•
•

•
•
•
•
•

•
•
•

Full door 

Half door

SSDRP2-S 

SSDRP2-SH 

Refrigerator left side stainless exterior and interior

SSDFP2-S 

SSDFP2-SH 

Freezer left side stainless exterior and interior

SADRP2-S 

SADRP2-SH 

Refrigerator left side stainless exterior and aluminum interior

SADFP2-S 

SADFP2-SH 

Freezer left side stainless exterior and aluminum interior

SMDRP2-S 

SMDRP2-SH 

Refrigerator left side stainless front aluminum exterior and interior

SMDFP2-S 

SMDFP2-SH 

Freezer left side stainless front aluminum exterior and interior

Models

Specification Line®

Self-Contained Solid Door Two-Section Dual Temp 
Refrigerator/Freezer Pass-Thru

Sp

ec

ifi

ca

tio

n L

in

e®

 So

lid

 D

oo

r T

w

o-S

ec

tio

n D

ua

l T

em

p R

efr

ig

era

to

r/F

re

ez

er 

Pa

ss-

Th

ru

Security (prison) package
6” polyurethane casters
Door field rehingability
Stainless steel interior door liner
Additional shelves
Tray slides
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
230-50-1 electrical
220-60-1 electrical

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•