Delfield Versa Drawer User Manual

Delfield ·  980 S. Isabella Road, Mt. Pleasant, MI 48858 ·  (989) 773-7981 or (800) 733-8829 ·  Fax (989) 773-3210 

Buttons are located next to the drawer display on 
the Control Panel. The drawer select buttons select 
the drawer to be configured.

These arrows are used to change a drawer to 
operate in a desired mode (refrigerate, freezer, 
thaw or chill).

Used to back up to the previous step.

The i button is used to initiate the manual 
defrost mode.

All operating functions are accessible on the Versa 
Drawer control panel. Operators can select the drawer 
modes or activate the manual defrost. Access to 
all diagnostic functions require a qualified service 
technician.

Setting the drawer mode
Select the drawer mode as follows:

1. Press the button next to the drawer display to be 

changed.

NOTE: Current drawer mode text size will decrease.

2. Press the UP or DOWN arrow to select between 

refrigerate, freeze, chill or thaw untill desired mode 
is reached.

3. Press the drawer display button again to lock the 

desired mode setting.

NOTE: Text size will return to original size.

NOTE:  The following two steps must be performed  
 

 within 1 second.

1. Press the desired drawer display button.

2. Immediately press the       button.

ButtonsButt

2

1

4

1. Press the [!] button until “Program Menu” appears.

2. Press the      button until brackets are around “Time 

& Date”, then press      .

3. Press            button to get to parameter to be 

adjusted.  

NOTE: The [^] under the text show parameter to be  

 

adjusted.

4. Press the            buttons to adjust parameter.

5. Once correct time and date are set press the    

button twice to return to the main display screen.  
(If no action is taken for 30 seconds control 
automatically returns to main display screen).

3