Delfield 4472N-24M User Manual
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
Fax: 800-669-0619
www.delfield.com
Delfield
™
®
Exterior top is one-piece 22-gauge stainless steel with
integral 2.12” (5.1cm) square nosing on the front. Telescoping
lid is constructed of 20-gauge stainless steel. Top opening
can accept 18, 24 or 30 1/6 size plastic pans 4”-6” (10.1cm-
15.2cm) deep. Adapter bars and 1/6 size pans are supplied by
Delfield. Temperature in top openings maintains 33°F (1°C) to
41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient
room temperature, meeting NSF 7 requirements. One 72” x
8” x .5” (183cm x 20.3cm x 1.3cm) polyethylene cutting board
treated with antimicrobial agent is mounted on the top at the
front edge.
integral 2.12” (5.1cm) square nosing on the front. Telescoping
lid is constructed of 20-gauge stainless steel. Top opening
can accept 18, 24 or 30 1/6 size plastic pans 4”-6” (10.1cm-
15.2cm) deep. Adapter bars and 1/6 size pans are supplied by
Delfield. Temperature in top openings maintains 33°F (1°C) to
41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient
room temperature, meeting NSF 7 requirements. One 72” x
8” x .5” (183cm x 20.3cm x 1.3cm) polyethylene cutting board
treated with antimicrobial agent is mounted on the top at the
front edge.
Exterior back and bottom are two-piece 24-gauge galvanized
steel. Exterior ends are stainless steel.
steel. Exterior ends are stainless steel.
Interior sides are thermoformed ABS plastic with shelf
supports. Base is fully insulated with high-density foamed in
place environmentally friendly, Kyoto Protocol Compliant, Non
ODP (Ozone Depletion Potential), Non GWP (Global Warming
Potential) polyurethane.
supports. Base is fully insulated with high-density foamed in
place environmentally friendly, Kyoto Protocol Compliant, Non
ODP (Ozone Depletion Potential), Non GWP (Global Warming
Potential) polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor
is 1/2 H.P., with condenser coil and hot gas condensate
evaporator mounted on rear of the cabinet. Evaporator coils
and temperature control are located on the interior rear wall of
the cabinet. Refrigerant flow is controlled by a capillary tube.
is 1/2 H.P., with condenser coil and hot gas condensate
evaporator mounted on rear of the cabinet. Evaporator coils
and temperature control are located on the interior rear wall of
the cabinet. Refrigerant flow is controlled by a capillary tube.
Cabinet maintains an interior cabinet temperature of 36°F to
40°F (2°C to 4°C).
40°F (2°C to 4°C).
ACT control. ACT electronic, solid state control, mounted on
the exterior rear of the cabinet, allows unit to maintain precise
temperatures in heavy duty conditions.
the exterior rear of the cabinet, allows unit to maintain precise
temperatures in heavy duty conditions.
Electrical connections are 115 volt, 60 Hertz, single phase.
Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.
Unit has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.
Casters: Equipment is mounted on 2” (5.08cm) diameter plate
casters with front two locking. Equipment clearance above the
floor is 2.5” (6.35cm).
casters with front two locking. Equipment clearance above the
floor is 2.5” (6.35cm).
Doors have a 24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet has one
adjustable epoxy-coated wire shelf per door opening.
thermoformed ABS plastic interior liner. Cabinet has one
adjustable epoxy-coated wire shelf per door opening.
Drawers have 24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Each top drawer holds one 12” x 20”
(30.5cm x 50.8cm) pan and three 1/9 size pans 4”-6” (10.2cm-
15.2cm) deep. Each bottom drawer holds one 12” x 20” (30.5cm
x 50.8cm) pan and three 1/9 size pans 4” (10.1cm) deep. Pans
are supplied by others.
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Each top drawer holds one 12” x 20”
(30.5cm x 50.8cm) pan and three 1/9 size pans 4”-6” (10.2cm-
15.2cm) deep. Each bottom drawer holds one 12” x 20” (30.5cm
x 50.8cm) pan and three 1/9 size pans 4” (10.1cm) deep. Pans
are supplied by others.
Specifications
Standard Features
Options &
Accessories
Accessories
Patented air screen ensures product stays cold without
drying it out
All 4400 Series units are 100% front breathing, which allows
the unit to be pushed against a wall or built into a cabinet
or an existing line up
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and is
backed by a limited lifetime warranty
Delfield supplies 1/6 size pans and adapter bars for top
opening
Mega top refrigerators are standard with 8” wide, dishwasher
safe polyethylene cutting board treated with anitmicrobial
agent
“D” prefix models feature Delfield’s new drawer system.
Drawers are backed by a 10-year warranty on the track
assembly
Environmentally friendly R404A refrigerant
High density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane keeps
energy costs low
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and installation
7’ cord and plug supplied
One epoxy coated wire shelf standard, installed per door
section
ACT solid state electronic control
One year parts and 90 day labor standard warranty.
drying it out
All 4400 Series units are 100% front breathing, which allows
the unit to be pushed against a wall or built into a cabinet
or an existing line up
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and is
backed by a limited lifetime warranty
Delfield supplies 1/6 size pans and adapter bars for top
opening
Mega top refrigerators are standard with 8” wide, dishwasher
safe polyethylene cutting board treated with anitmicrobial
agent
“D” prefix models feature Delfield’s new drawer system.
Drawers are backed by a 10-year warranty on the track
assembly
Environmentally friendly R404A refrigerant
High density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane keeps
energy costs low
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and installation
7’ cord and plug supplied
One epoxy coated wire shelf standard, installed per door
section
ACT solid state electronic control
One year parts and 90 day labor standard warranty.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4472N-18M
Three section with doors eighteen pan capacity
D4472N-18M
Three section with drawers eighteen pan capacity
4472N-24M
Three section with doors twenty-four pan capacity
D4472N-24M
Three section with drawers twenty-four pan capacity
4472N-30M
Three section with doors thirty pan capacity
D4472N-30M
Three section with drawers thirty pan capacity
•
•
•
•
•
•
•
•
•
•
•
Models
4472N Mega Top
Front-Breathing Self-Contained Compact Mega Top Refrigerators
44
72
N
M
eg
a T
op
Fro
nt-
Bre
ath
in
g S
elf
-C
on
ta
in
ed
C
om
pa
ct
M
eg
a T
op
R
efr
ig
era
to
rs
Flat lift off cover
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
Exterior thermometer
Glass door(s)
*220V/50 Hertz electrical system
* Inclusion of this option will
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
Exterior thermometer
Glass door(s)
*220V/50 Hertz electrical system
* Inclusion of this option will
alter electrical specifications
of the unit.
of the unit.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4472N-30M