Delfield 4432N-12M Leaflet
Project __________________________________
Item ____________________________________
Quantity ________________________________
CSI Section 11400
Approved _______________________________
Date ____________________________________
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
Fax: 800-669-0619
www.delfield.com
Delfield
™
®
Exterior top is one-piece, 22-gauge stainless steel with
integral 2.12” (5.1cm) square nosing on the front. Top has two
openings to accept twelve 1/6-size 4” (10.1cm) or 6” (15.2cm)
deep pans or two 12” x 20” (30.5cm x 50.8cm) full size pans, 4”
(10.1cm) or 6” (15.2cm) deep. Adapter bars and 1/6 size pans
are supplied by Delfield. Telescoping cover is constructed
of 20-gauge stainless steel. Temperature in top opening to
maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2.5”
(6.4cm) at 86°F ambient room temperature, meeting NSF 7
requirements. One 32” x 8” x .5” (81.3cm x 20.3cm x 1.3cm)
polyethylene cutting board treated with antimicrobial agent is
mounted on the top at the front edge.
integral 2.12” (5.1cm) square nosing on the front. Top has two
openings to accept twelve 1/6-size 4” (10.1cm) or 6” (15.2cm)
deep pans or two 12” x 20” (30.5cm x 50.8cm) full size pans, 4”
(10.1cm) or 6” (15.2cm) deep. Adapter bars and 1/6 size pans
are supplied by Delfield. Telescoping cover is constructed
of 20-gauge stainless steel. Temperature in top opening to
maintain 33°F (1°C) to 41°F (5°C), with pans recessed 2.5”
(6.4cm) at 86°F ambient room temperature, meeting NSF 7
requirements. One 32” x 8” x .5” (81.3cm x 20.3cm x 1.3cm)
polyethylene cutting board treated with antimicrobial agent is
mounted on the top at the front edge.
Exterior back and bottom are two-piece 24-gauge galvanized
steel. Exterior ends are stainless steel.
steel. Exterior ends are stainless steel.
Interior sides are thermoformed ABS plastic with pilaster shelf
supports and clips. Base is fully insulated with high-density
foamed in place environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion Potential), Non GWP
(Global Warming Potential) polyurethane.
supports and clips. Base is fully insulated with high-density
foamed in place environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion Potential), Non GWP
(Global Warming Potential) polyurethane.
Refrigeration system uses HFC-404A refrigerant. Compressor
is 1/5 H.P., with condenser coil and hot gas condensate
evaporator mounted on rear of the cabinet. Evaporator coils
are located on the interior rear wall of the cabinet. Refrigerant
is 1/5 H.P., with condenser coil and hot gas condensate
evaporator mounted on rear of the cabinet. Evaporator coils
are located on the interior rear wall of the cabinet. Refrigerant
flow is controlled by a capillary tube. Cabinet maintains an
interior cabinet temperature of 36°F to 40°F (2°C to 4°C).
interior cabinet temperature of 36°F to 40°F (2°C to 4°C).
ACT control. ACT electronic, solid state control, mounted on
the exterior rear of the cabinet, allows unit to maintain precise
temperatures in heavy duty conditions.
the exterior rear of the cabinet, allows unit to maintain precise
temperatures in heavy duty conditions.
Electrical connection is 115 volt, 60 Hertz, single phase. Unit
has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.
has a 7’ (2.1m) long electrical cord and NEMA 5-15P plug.
Casters: Equipment is mounted on 2” (5.08cm) diameter plate
casters with front two locking. Equipment clearance above the
floor is 2.5” (6.35cm).
casters with front two locking. Equipment clearance above the
floor is 2.5” (6.35cm).
Doors have a 24-gauge stainless steel exterior, with
thermoformed ABS plastic interior liner. Cabinet has one
adjustable epoxy-coated wire shelf.
thermoformed ABS plastic interior liner. Cabinet has one
adjustable epoxy-coated wire shelf.
Drawers have 24-gauge stainless steel exterior with
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Top drawer will hold two 12” x 20”
(30.5cm x 50.8cm) pans 4”- 6” (10.1cm - 15.2cm) deep. Bottom
drawer holds two 12” x20” (30.5cm x 50.8cm) pans 4” (10.1cm)
deep. Pans are supplied by others.
thermoformed ABS plastic interior liner. Drawer frames are
12-gauge stainless steel. Drawer slides are 11-gauge stainless
steel with Delrin bearings. Top drawer will hold two 12” x 20”
(30.5cm x 50.8cm) pans 4”- 6” (10.1cm - 15.2cm) deep. Bottom
drawer holds two 12” x20” (30.5cm x 50.8cm) pans 4” (10.1cm)
deep. Pans are supplied by others.
Specifications
Standard Features
Options &
Accessories
Accessories
Patented air screen ensures product stays cold without
drying it out
100% front breathing, which allows the unit to be pushed
against a wall or built into a cabinet or an existing line up
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and is
backed by a limited lifetime warranty
Delfield supplies 1/6 size pans and adapter bars for top
opening
Mega top refrigerators are standard with 8” wide, dishwasher
safe polyethylene cutting board treated with anitmicrobial
agent
“D” prefix models feature Delfield’s new drawer system.
Drawers are backed by a 10-year warranty on the track
assembly
Environmentally friendly R404A refrigerant
High density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane keeps
energy costs low
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and installation
7’ cord and plug supplied
Cord spring relief - prevents cord rollover
One epoxy coated wire shelf standard, installed per door
section
ACT solid state electronic control
One year parts and 90 day labor standard warranty.
drying it out
100% front breathing, which allows the unit to be pushed
against a wall or built into a cabinet or an existing line up
Durable, rugged stainless steel sides, top and front
Features Delfield’s exclusive ABS interior (on sides). ABS
is extremely durable - it won’t dent, chip or corrode and is
backed by a limited lifetime warranty
Delfield supplies 1/6 size pans and adapter bars for top
opening
Mega top refrigerators are standard with 8” wide, dishwasher
safe polyethylene cutting board treated with anitmicrobial
agent
“D” prefix models feature Delfield’s new drawer system.
Drawers are backed by a 10-year warranty on the track
assembly
Environmentally friendly R404A refrigerant
High density foamed in place environmentally friendly, Kyoto
Protocol Compliant, Non ODP (Ozone Depletion Potential),
Non GWP (Global Warming Potential) polyurethane keeps
energy costs low
Black recessed quick grip handle
Standard on 2” casters for easy cleaning and installation
7’ cord and plug supplied
Cord spring relief - prevents cord rollover
One epoxy coated wire shelf standard, installed per door
section
ACT solid state electronic control
One year parts and 90 day labor standard warranty.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4432N-12M
Single section with doors twelve pan capacity
D4432N-12M Single section with drawers twelve pan capacity
•
•
•
Models
4432N Mega Top
Front-Breathing Self-Contained Compact Mega Top Refrigerators
44
32
N
M
eg
a T
op
Front
-Br
-Br
eathing S
elf-
Contained C
Contained C
ompac
t M
ega
Top R
efr
ega
Top R
efr
igerat
ors
Flat lift off cover
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
Exterior thermometer
Glass door(s)
*220V/50 Hertz electrical
system
* Inclusion of this option will
18” wide single tier overshelf
Stainless steel finish on back
Plastic laminate on front
Additional wire shelves
Door lock
Exterior thermometer
Glass door(s)
*220V/50 Hertz electrical
system
* Inclusion of this option will
alter electrical specifications
of the unit.
of the unit.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4432N-12M