Panasonic NR-BN34FW1 User Manual

Water

“Multibox” storage box can make ice cubes and store them.

To make ice cubes, fill the lid of the “Multibox” storage box 

with water and place it in the freeze drawer of the freezer.

When ice cubes are ready, take out the box from the 

freezer drawer. Remove the lid from the box, and push 

each cavity of the lid from the back side. The ice cubes will 

pop out from the lid. Then, put the box back into its place.

Water level line

Open the freezer, pull out the upper drawer and take out 

the ice tray. Fill water in the ice tray to the water level line 

and then place back the ice tray.

When ice cubes are ready, pull out the upper drawer and 

take out the ice tray. Slightly twist the ice tray by holding its 

two sides, the ice cubes will drop from the ice tray. Then, 

put the ice tray back into its place.

To remove a shelf from the 

refrigerator, pull it out to the 

point when it is stopped by 

the guide. Then, lift it slightly 

at the front part and pull it all 

the way out.

Pull out the case as far as it will 

go. Then, lift the front part and 

pull it out completely.

To remove a shelf from the 

appliance, lift it as far as it 

will go and pull it out.

The drawers are protected against pulling out. To remove a drawer from the appliance, 

open it, then lift the front part and pull it out.

Having removed the drawer, you can store food in the empty compartment.

•  The bin at the bottom of the refrigerator is intended for storing fruit and vegetables. 

It keeps humidity and prevents the food from drying out.

•  Store the food in suitable packaging to prevent them from emitting or taking on odors.

The bin has integrated humidity regulator which allows setting the humidity 

according to the amount of food stored.

Smaller amounts of food - push the control slider to the right.

Larger amounts of food - push the control slider to the left.