Haier KGG6202-A1 User Manual
OPERATION
GB
38
● B
Button positions between
in
are
not recommended. In these positions
the flame is not stabilized and may be
extinguished.
the flame is not stabilized and may be
extinguished.
● IIf the flame goes out repeat the
procedure.
● IIf the burner flame
goes out (for
whatever reason), shut the burner off
and wait for at least one minute before
next attempt.
and wait for at least one minute before
next attempt.
● B
Before igniting the burners cover them
with appropriate cookware.
with appropriate cookware.
Operation of the burner protection
valve
valve
Some models are equipped with an
automatic system that cuts off gas supply
to a burner when the flame has
disappeared.
This system protects the cooker against
gas leakage when the flame on a burner
goes out e.g. in case of spillage.
The user’s intervention
automatic system that cuts off gas supply
to a burner when the flame has
disappeared.
This system protects the cooker against
gas leakage when the flame on a burner
goes out e.g. in case of spillage.
The user’s intervention
is needed to
re-ignite the burner.
Oven functions and operation
150°
150°
220°
265°
160°
175°
195°
215°
235°
255°
265°
Oven is equipped with gas valve with
temperature regulator and anti-outflow
protection. To ignite the oven, as in the
description below, keep down the pressed
knob during about 3 s, this is the time
necessary to warm the sensor and to make
the protection function. If the flame goes
out, repeat ignition operations after a lapse
of 3 sec. if the flame does not start burning
within 10 sec., repeat the ignition operation
after lapse of about 1 min, i.e. after the
oven ventilation.
temperature regulator and anti-outflow
protection. To ignite the oven, as in the
description below, keep down the pressed
knob during about 3 s, this is the time
necessary to warm the sensor and to make
the protection function. If the flame goes
out, repeat ignition operations after a lapse
of 3 sec. if the flame does not start burning
within 10 sec., repeat the ignition operation
after lapse of about 1 min, i.e. after the
oven ventilation.
Oven
Electric grill
Top electric grill element
The push-button controls electric
(KGG5201-A1/KGG6201-A1)
1
2
3
KGG5202-A1 / KGG6202-A1
KGG5201-A1 / KGG6201-A1
Caution!
grill.
OPERATION
To ignite the bottom burner
Strike a match,
Press down the knob to the stop and
turn left to the position corresponding
to the temperature chosen,
turn left to the position corresponding
to the temperature chosen,
Put the match to the ignition opening
(see the figure below) and keep the
knob pressed down about 3 sec. from
the gas ignition moment . if the flame
has gone out, repeat the ignition
operation after lapse of 3 sec.
(see the figure below) and keep the
knob pressed down about 3 sec. from
the gas ignition moment . if the flame
has gone out, repeat the ignition
operation after lapse of 3 sec.
Caution!
The temperature control is possible at
closed oven door only.
Turn the knob right to the stop in order to
turn the oven off.
closed oven door only.
Turn the knob right to the stop in order to
turn the oven off.
Push-button ignition
Press the spark ignition push -button
marked with
,
Press in the knob to the end and turn
it left to the ”8” position
it left to the ”8” position
Hold down until gas has lit,
Set the required position.
Baking pans and accessories (oven grid,
baking tray, etc) may be inserted into the
oven in 5 guiding levels.
Appropriate levels are indicated in the
tables that follow.
Always count levels from the bottom
upwards!
baking tray, etc) may be inserted into the
oven in 5 guiding levels.
Appropriate levels are indicated in the
tables that follow.
Always count levels from the bottom
upwards!
1
1
2
2
3
3
4
4
5
5
Oven guide levels
Turn the knob to the large flame position
“8”,when ignite the oven.Turn the knob to
the selected position after the stable
condition is formed.
“8”,when ignite the oven.Turn the knob to
the selected position after the stable
condition is formed.
GB
39
(KGG5202-A1/KGG6202-A1)