Lexmark C762 User Manual

Use these commands to print one of the internal information pages.

@PJL testpage[<CR>]<LF>

The supported 

testpage

 values are listed in the following table.

For example, to print a menu settings page:

@PJL LPRINTMENUS[<CR>]<LF>

This command modifies the code point of the escape character for the host computer 
specified by the PORT parameter. The escape character is mapped to code point 
0x1B for each host interface port.

@PJL LESCAPECHAR CHAR=byte PORT=port [<CR>]<LF>

CHAR

 parameter

The 

byte

 value for the CHAR parameter is the code point of the ASCII character 

used for the escape character.

For example, at the factory, the printer uses 0x1B (character <Esc>) for the 
escape character. If CHAR = 65 is specified with this command, the printer uses 
0x41 (character ‘A’) as the escape character for the host interface port specified 
via the PORT parameter.

LPRINTDIRECTORY

Prints both the flash and disk directory listings. If neither flash 
memory or a disk is installed, the command is ignored.

LPRINTTESTPAGE

Prints the test page.

LPRINTMENUS

Prints the menu settings page.

LPRINTPCLFONTS

Prints the PCL font listing.

LPRINTPSFONTS

Prints the PostScript font listing.