Lexmark C762 User Manual
Interfaces
8-3
11
Click
OK
.
12
Close all windows now that the port is set up.
Setting Up the Communications Port Using Windows NT 4.0
In your Windows NT 4.0 application:
1
On the Menu bar, click
Start
.
2
Click
Settings
.
3
Click
Control Panel
. The Control Panel screen appears.
4
Double-click the
Ports
icon. The Ports screen appears.
5
Select the communications port you want to configure.
6
Click the
Settings
button.
The Settings screen for this specific port displays. For example, if you select the
COM1 port, then the Settings for COM1 screen displays.
COM1 port, then the Settings for COM1 screen displays.
7
Fill out the fields for the following printer settings to make them match your
printer settings:
printer settings:
•
Baud Rate
•
Parity
•
Stop bits
•
Flow Control
Note:
For Flow Control, select Hardware if you want DTR protocol or Xon/
Xoff for Xon/Xoff protocol.
8
Click
OK
.
9
Close all screens now that the port is set up.