Lexmark C762 User Manual

The printer also supports a Device ID function. When queried for its ID, the printer 
returns the following information:

•

Manufacturer

•

Command set

•

Model of printer

The LEXPARAL.EXE file is available from ftp.lexmark.com as /pub/driver/
technical_brief/LEXPARAL.EXE. Use your web browser to access ftp://
ftp.lexmark.com/pub/driver/technical_brief/LEXPARAL.EXE.

When the 

 menu item is set to 

, the printer supports IEEE 1284 

communication. If the attached host computer does not support IEEE 1284 
communication, you can turn 

to

 from the printer operator panel or 

through MarkVision Professional, and SLCTIN* and AUTO FD XT* will be ignored.

Excessive device queries and status checks (Nibble and Byte modes) will 
slow printer performance.

You can get IEEE 1284 documentation by calling 1-800-678-IEEE (order number 
DS02709).

Parallel Mode 1 is a feature available for many Lexmark printers. The factory default 
setting is 

 or 

 depending on your printer model. See your printer documentation 

for the factory default for your printer.

If the host side of the parallel interface is using open collector drivers to transmit data 
to the printer, 

 should be set to 

 to increase reliability of data transfer. 

Turning this mode 

 equalizes all parallel interface signal impedances. On some 

printer models, you can set 

to

 from the printer operator panel, 

through MarkVision Professional, or through a PJL command. See your printer 
documentation for more information.