Smeg A3A-5 User Manual
Instructions for the user
10.2 Cleaning of cooking hob components
Before performing any operations requiring access to powered
parts, switch off the power supply to the machine.
parts, switch off the power supply to the machine.
10.2.1 Barbecue griddle
Extract the griddle from its seat (after
leaving it to cool) by lifting it from the front
as shown in the diagram and taking care
not to spill the residues which have
collected in the grooves at the sides.
Clean it with an ordinary detergent and a
non-abrasive sponge.
leaving it to cool) by lifting it from the front
as shown in the diagram and taking care
not to spill the residues which have
collected in the grooves at the sides.
Clean it with an ordinary detergent and a
non-abrasive sponge.
10.2.2 Barbecue drip tray
To remove the drip tray under the
barbecue element:
1. Remove the griddle as described
barbecue element:
1. Remove the griddle as described
in point 10.2.1;
2. Raise the heating element and fix
it in place by sliding the retainer to
the right (as shown in the adjacent
diagram);
the right (as shown in the adjacent
diagram);
3. Remove the drip tray using the
two handles and clean using
specific detergents for stainless
steel and a non-abrasive sponge.
specific detergents for stainless
steel and a non-abrasive sponge.
10.2.3 Grids
Remove the right-hand pan stands (griddle + fish burner) as shown in the
diagram. There is no special order for removal of the left-hand pan
stands. Clean the pan stands in warm water and non-abrasive detergent,
taking care to remove all deposits. Replace, fitting first the outside pan
stand then the griddle.
Remove the right-hand pan stands (griddle + fish burner) as shown in the
diagram. There is no special order for removal of the left-hand pan
stands. Clean the pan stands in warm water and non-abrasive detergent,
taking care to remove all deposits. Replace, fitting first the outside pan
stand then the griddle.
72