Sharp Electric Rang User Manual

To reduce the risk of tipping the range, it must

be secured by properly installed Anti-Tip bracket packed with

the range.
 •  This range must be electrically grounded in accordance with

local codes, or in their absence, with the National Electrical

Code ANSI/NFPA No. 70—latest edition in United States.

 •  The installation of ranges designed for manufactured (mobile)

home installation must conform with Manufactured Home

Construction and Safety Standard, title 24CFR, part 3280

[Formerly the Federal Standard for Mobile Home Construction

and Safety, title 24, HUD (part 280)] or when such standard

is  not  applicable,  the  Standard  for  Manufactured  Home

Installation 1982 (Manufactured Home Sites, Communities

and Setups), ANSI Z225. 1/NFPA 501A- latest edition, or with

local codes in United States.

 •  Make sure the wall coverings and the cabinets around the range

can withstand the heat generated by the range.

 •  Before  installing  the  range  in  an  area  covered  with 

discoloring. Do not install the range over carpeting unless

you place an insulating pad or sheet of

1

/

4

-inch (0.64cm) thick

plywood between the range and carpeting.

Never leave children alone or unattended in the 

area where an a range is in use. As children grow, teach them the

proper, safe use of all appliances.

Stepping, leaning or sitting on the door or drawer

of this range can result in serious injuries and can also cause damage

to the range.

 •  Do not store items of interest to children in the cabinets 

above the range. Children could be seriously burned climbing

on the range to reach items.

 •  To eliminate the need to reach over the cooktop, cabinet storage

space above the cooktop should be avoided.

 •  Do not use the oven as a storage space. This creates a

potentially hazardous situation.

 •  Never use the range for warming or heating the room.
 •  Do not store or use gasoline or other flammable vapors and 

liquids near this or any other range. Explosions or fires could 

result.

 •  Reset  all  controls  to  the  “off”  position  after  using  a 

 •  Remove broiler pan, oven racks, food and other utensils 

before self-cleaning the oven. Wipe up excess spillage. Follow

the precleaning instructions in the Operation Manual.

 •  Read all of the Installation Manual before installing the range.
 •  Remove all packing material from the oven and drawer before

connecting the electrical supply to the range.

 •  Observe all governing codes and ordinances.
  •   Be sure to leave these instructions with the consumer.

Keep this manual with your Operation Manual for future reference.

 •  As when using any range generating heat, there are certain

safety precautions you should follow. These are listed in the

Operation Manual. Read all and follow carefully.

  •   Be sure your range is installed and grounded properly by a 

qualified installer or service technician.

Remove  all  packing

materials from inside

the Microwave Drawer

and the oven cavity.

DO NOT REMOVE

THE  WAVEGUIDE

COVER,  which  is

located  on  the  top

of  the  Microwave

Drawer.

Remove  the  feature

sticker, if there is one.

Check the drawer for

any damage, such as

misaligned  or  bent

drawer, damaged drawer seals and sealing surfaces, broken

or loose drawer guides and dents inside the drawer or on the

front side of the drawer. If there is any damage, do not operate

the Microwave Drawer and contact your dealer or a SHARP

AUTHORIZED SERVICER.

If the information in this manual is not followed

exactly, a fire or electrical shock may result causing property damage, 

personal injury or death.