Sennheiser EW 300 IEM G2 User Manual

Page of 40
69
Recommendations and tips
... for the EK 300 IEM G2 receiver
y The antenna of the EK 300 IEM G2 should hang freely and be at least 1 cm
away from the body. The antenna must not be in direct contact with the
skin.
... for optimum reception
y Transmission range depends to a large extent on location and can vary
from about 10 m to about 150 m. There should be a “free line of sight”
between transmitting and receiving antennas.
y If, with the SR 300 IEM G2 transmitter, transmission conditions are
unfavourable, you should use a remote antenna which is connected via
antenna cable.
y To avoid overmodulating the receiver, observe a minimum distance of 5 m
between transmitting and receiving antennas.
y Observe a minimum distance of 50 cm between transmitting antennas and
metal objects (such as cross members or reinforced-concrete walls).
... for multi-channel operation
y For multi-channel operation, you can only use the channels in a channel
bank. Each of the channel banks “1” to “8” accommodates up to 12
factory-preset frequencies which are intermodulation-free. For alternative
frequency combinations, please refer to the enclosed frequency table. The
freely selectable frequencies can be selected via the “
Tune
” menu and can
be stored in the channel bank “U”.
y When using several transmitters simultaneously, interference can be
avoided by maintaining a minimum distance of 20 cm between two
transmitters. For multi-channel applications, use the AC 2 transmitter
combiner (see “Accessories” on page 73).
Care and maintenance
Use a slightly damp cloth to clean the units from time to time.
Note:
Do not use any cleansing agents or solvents.