Furuno 1734C Service Manual
7. CUSTOMIZING YOUR UNIT
7-26
7.7.2 GPS receiver setup (Set equipped with GP-310B/320B)
The GPS SETUP menu sets up the GPS Receiver GP-320B. Press the MENU key followed
by the SYSTEM CONFIGURATION, NAV OPTION and GPS SENSOR SETTINGS soft
keys to display this menu.
by the SYSTEM CONFIGURATION, NAV OPTION and GPS SENSOR SETTINGS soft
keys to display this menu.
GPS
SETUP
SETUP
EDIT
GEODETIC DATUM
WGS-84
POSITION SMOOTHING
000 second(s)
SPD/CSE SMOOTHING
005 second(s)
LATITUDE OFFSET
0.000’N
LONGITUDE OFFSET
0.000’E
DISABLE SATELLITE
_ _ _ _ _ _
LATITUDE
38 00.000’ N
LONGITUDE
123 00.000’ E
ANTENNA HEIGHT
005 m
GPS FIX MODE
2D/3D
COLD START
NO
RETURN
GPS
STATUS
STATUS
WAAS
SETUP*
SETUP*
*: Only when the GP-320B is connected.
GPS setup menu
Contents of GPS setup menu
Item Description
Settings
Geodetic Datum
Geodetic datum is a reference for geodetic
survey measurements consisting of fixed
latitude, longitude and azimuth values
associated with a defined station of
reference. You must have the correct
geodetic datum selected in your plotter so
that it will reference the correct point on
the chart for a given latitude and longitude.
Although WGS-84 is now the world
standard, other categories of charts still
exist. Refer to Appendix for a full list of
geodetic datum.
survey measurements consisting of fixed
latitude, longitude and azimuth values
associated with a defined station of
reference. You must have the correct
geodetic datum selected in your plotter so
that it will reference the correct point on
the chart for a given latitude and longitude.
Although WGS-84 is now the world
standard, other categories of charts still
exist. Refer to Appendix for a full list of
geodetic datum.
See Appendix for full list.
(Con’t on next page)