NEC MultiSync V321 User Manual

Acts as   button to move the highlighted area down to
select adjustment items within OSD menu.

 EXIT button

Activates the OSD menu when the OSD menu is turned-off.
Acts as EXIT button within the OSD to move to previous
menu.

 Remote control sensor and Power Indicator

Receives the signal from the remote control (when using the
wireless remote control). See also page 10.
Glows green when the LCD monitor is in active mode.
Glows red when the LCD is in POWER OFF mode.
When the LCD monitor is in POWER SAVE mode, it will
glow both green and red. When SCHEDULE is enabled, it
will blink green and glow red. See page 17. When a
component failure is detected within the monitor, the
indicator will blink red.

 Main Power Switch

On/Off switch to turn main power ON/OFF. See also page 16.

This control completely locks out access to all Control Key
functions. To activate the control key lock function, press both

 and   and hold down simultaneously for more than

3 seconds. To resume user mode, press both   and   and
hold simultaneously for more than 3 seconds.

 POWER button (

Switches the power on/off. See also page 16.

 MUTE button

Switches the audio mute ON/OFF.

 INPUT button

Acts as SET button within OSD menu. Shows Input select
menu for [DVI], [VGA], [RGB/HV], [HDMI], [DVD/HD],
[S-VIDEO], [VIDEO1], [VIDEO2].

 PLUS (+) button

Acts as (+) button to increase the adjustment with OSD menu.
Increases the audio output level when the OSD menu is
turned off.

 MINUS (-) button

Acts as (-) button to decrease the adjustment with OSD menu.
Decreases the audio output level when the OSD menu is
turned off.

 UP ( ) button

Acts as   button to move the highlighted area up to select
adjustment items within OSD menu.

OFF

ON