Planar PXL2470MW User Manual

1. 

Connect either VGA, HDMI or DisplayPort Video Source from the monitor to the computer. 
Make sure both monitor and computer are powered OFF. Please note. The monitor ships 
with VGA and DisplayPort cables only. HDMI cable may be sourced separately from a cable 
supplier. 

2. 

Connect the audio cable from audio output of computer to the audio input of the monitor. 

3. 

Connect the earphone to the earphone output terminal of the monitor. (Earphone sold 
separately). 

4. 

Connect power cord to an AC/DC power adapter, and to a properly grounded AC outlet, 
and then to the monitor. 

5. 

Power-ON computer and then POWER-ON the monitor. 

6. 

Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x 
1080 @ 60Hz. 

 
Figure 1: 

 

PC

Earphone 
(not supplied) 

VGA cable

HDMI cable 

(not supplied) 

Audio cable

DisplayPort cable 

Power cable 

AC Power cable

AC/DC Power 

adapter 

   

 

 

 

9