3M M170 User Manual

 

Welcome to the world of 3M Touch Systems — a world where using a computer is as 
simple as touching the screen. This guide describes how to set up your M170 Flat Panel 
Display (FPD) touch monitor. 

This document assumes you have basic computer skills.  You should know how to use 
the mouse and keyboard, choose commands from menus, open and run application 
programs, and save files. 

Read and understand all safety information before using this product. Follow all 
instructions marked on the product and described in this document.  Pay close attention to 
the following installation warnings and safety precautions. 

The M170 flat panel display (FPD) touch monitor was designed for touch input and 
tested to replace an existing monitor.  These monitors are intended for indoor use 
only and are not designed for use in hazardous locations. 

 

  DANGER 

To avoid the risk of fire and/or explosion which will result in serious injury or death:  

• 

Do not install or use this product in a hazardous location.

 

  WARNING 

•  Do not remove the cover or back of the monitor.  

 
To avoid the risk of electric shock which could result in serious injury or death: 

•  This device must be operated with the original power supply, part number: HJC, 

HASU05F. 

•  Do not use a damaged power supply. 
•  Do not use a power cord that is frayed or otherwise damaged. 

 

3M Touch Systems Proprietary Information