Lucent Technologies 5 User Manual
MERLIN LEGEND Communications System Release 5.0
System Manager’s Guide
System Manager’s Guide
555-650-118
Issue 1
June 1997
Managing the System
Page 6-65
Connecting Auxiliary Equipment
6
Connecting Auxiliary Equipment
6
Use the information in this section to do the following:
■
Identify the line/trunk or extension jacks used for auxiliary equipment and
applications, for example, a music source for Music On Hold, loudspeaker
paging equipment, maintenance alarm (that is, an external alerting device
that sounds or flashes when maintenance problems occur), or a fax
machine.
applications, for example, a music source for Music On Hold, loudspeaker
paging equipment, maintenance alarm (that is, an external alerting device
that sounds or flashes when maintenance problems occur), or a fax
machine.
■
Specify the extensions to receive a message-waiting indication (MWI)
when a fax transmission is received, and specify the length of time before
the system registers that a fax has arrived and sends the MWI.
when a fax transmission is received, and specify the length of time before
the system registers that a fax has arrived and sends the MWI.
■
Specify the number of rings before a call transferred by the voice
messaging system goes to the backup position for both integrated and
generic voice messaging interface (VMI) ports, rather than going to a voice
mailbox.
messaging system goes to the backup position for both integrated and
generic voice messaging interface (VMI) ports, rather than going to a voice
mailbox.
NOTE:
Although a CTI (Computer Telephony Integration) link, Release 5.0 and
later systems only, is treated in the system as auxiliary equipment, the
programming of this feature is described later in this chapter in
later systems only, is treated in the system as auxiliary equipment, the
programming of this feature is described later in this chapter in
Planning Guidelines
6
For Music On Hold
If you use equipment that rebroadcasts music or other copyrighted materials, you
may be required to obtain a copyright license from and pay license fees to a third
party [such as the American Society of Composers, Artists, and Producers
(ASCAP) or Broadcast Music Incorporated (BMI)]. Magic on Hold requires no
such license and can be purchased from your Lucent Technologies
representative.
may be required to obtain a copyright license from and pay license fees to a third
party [such as the American Society of Composers, Artists, and Producers
(ASCAP) or Broadcast Music Incorporated (BMI)]. Magic on Hold requires no
such license and can be purchased from your Lucent Technologies
representative.
Only one Music On Hold line/trunk jack is allowed per system.
You cannot assign the line/trunk identified for Music On Hold to a line/trunk pool. If
the line/trunk is currently assigned to a pool, you must remove it before you
program this option.
the line/trunk is currently assigned to a pool, you must remove it before you
program this option.
You cannot assign the line/trunk identified for use with Music On Hold to a button
on any telephone or as a Remote Access trunk, and you cannot use the line/trunk
jack identified for Music On Hold for a loudspeaker paging system or maintenance
alarm.
on any telephone or as a Remote Access trunk, and you cannot use the line/trunk
jack identified for Music On Hold for a loudspeaker paging system or maintenance
alarm.
Because this procedure requires an idle system, you may want to perform it after
hours.
hours.