Oregon Scientific BAR610B User Manual

3

flip projected image 180°

10. °C / °F: Select temperature unit
11. Battery compartment
12. RESET:  Reset unit to default settings
13. AC/DC Adaptor socket
14. Wall mount holes

1

2

3
4

5

6

1.  RESET: Reset unit to default settings
2.  EU / UK Switch (RTHN318D sensor only)
3.  Channel Switch
4.  Double sided adhesive tape
5.  Wall mount hole
6.  Battery compartment

For continuous use of projector, install adapter.

•  Plug  AC/DC  adaptor  into  socket.    Make  sure  the 

adapter is not obstructed and is easily accessible 
to the unit.

To  completely  disconnect  from  power,  the  adapter 
should be disconnected from the main unit.

NOTE  The  main  unit  and  adapter  should  not  be 
exposed to wet conditions.  No objects filled with liquid, 
such as vases, should be placed on the main unit and 
adapter.

1.  Remove the battery compartment cover.
2.  Insert the batteries, matching the polarities.

NOTE Batteries should not be exposed to excessive 
heat such as sunshine or fire.

1.  Slide open the battery door.
2.  Slide channel switch to channel 1.
3.  Select 

EU/UK. (RTHN318D only) 

4.  Insert the battery, matching the polarities (+ / -).
5.  Press RESET after each battery change.
6.  Close the battery door.
7.  Press  and  hold  UP  and  DOWN  on  main  unit 

BAR610P_M_EN_R3.indd   3

12/9/08   17:55:44