Tascam DR-100MKII User Manual

g

Shift to the left end (in the direction of the arrow) to 
engage the hold function.
All buttons are inoperative when hold is ON.

h

Use to adjust the volume output from the built in 
speaker or    jack.

j

Use to connect headphones. (See “Connecting 
monitors and headphones” on page 25.) 

k

Use a stereo mini jack cable to connect to the line input 
connector on an external device.

l

Use a stereo mini jack cable to connect to the line 
output connector on audio equipment or other 
external device.

;

Connect to a computer using the included USB cable. 
(See “7 – Connecting with a Computer” on page 47.)

Always connect the recorder directly to a computer. Do not 
use a USB hub.
z

Connect a PS-P520 AC adaptor or BP-6AA battery pack 
(both sold separately).

x

button 

Press and hold to turn the power ON and OFF.

c

Connect the included TASCAM RC-10 wired remote 
control or a TASCAM RC-3F footswitch (sold separately) 
here. You can use the remote control to operate the 
unit, including stopping and starting playback. (See “9 
– Using the REMOTE/DIGITAL IN jack” on page 52.) In 
addition, you can input a digital signal by connecting 
the included digital input conversion cable. (See “Using 
digital input” on page 52.)

v

battery) 
Compartment for the unit’s dedicated lithium ion 
battery. (See “Using the lithium ion battery” on page 
20.) 

b

  INPUT knob 

Adjusts the input volume.

n

Set the sensitivity of the mic input.