Tascam DR-100MKII User Manual

3  Press the . or / button to move the cursor 

MENU

While setting the time, the time display stops changing.

• 

You can set the unit to automatically add the date to file 

• 

names. (See “Setting the format of file names” on page 
51.) 

The date and time setting can only be maintained for a 
few minutes if the unit is not powered from batteries or 
through the TASCAM PS-P520 AC adaptor (sold separately). 
When using batteries, replace them before they completely 
lose power.

An SD card is already installed when the unit is shipped 
from the factory. If you want to use this card to record and 
play tracks, there is no need to reinstall it.
1  Open the SD slot cover on the rear panel.
2  Insert the SD Card into the slot as shown in the 

Do not remove the SD card from the unit when it is 

• 

connected to a computer by USB.

SD cards that meet SD or SDHC standards can be used 

• 

with this unit.
A list of SD cards that have been confirmed to work with 

• 

this unit can be found on our website (http://tascam.
com/).

SD cards have protect switches that prevent writing new 
data to them.

Unprotected               Protected

If you slide the protect switch to the “LOCK” position, file 
recording and editing is not possible. Move the switch 
to the unlocked position in order to record, erase and 
otherwise edit data on the card.

In order to use an SD card in this unit, you must format it 
first.

Please use a PS-P520 AC adaptor (sold separately) or 

• 

make certain that there is sufficient remaining battery 
power when formatting a card. 
Formatting a card erases all the data on it.

• 
1  Confirm that an SD card is installed and turn the