DELL 34XX User Manual

[host-name-or-IP-address2]]

[-n storage-array-name | -w WWID | -h host-name |

-r (host_sa | direct_sa)] [-S]

SMcli -d [-w][-i][-s][-v][-S]

SMcli -m host-name-or-IP-address -F email-address

[-g contactInfoFile][-S]

SMcli -A [host-name-or-IP-address

[host-name-or-IP-address]] [-S]

SMcli -X (-n storage-array-name | -w WWID |

-h host-name)

SMcli -?

Command Line Parameters

Table 2. Command Line Parameters

Parameter

Definition

host

‑name-or-IP-address

Specify either the host name or the Internet 
Protocol (IP) address of an in-band managed 
storage array (IPv4 or IPv6) or an out-of-band 
managed storage array (IPv4 or IPv6).
• If you manage a storage array by using a host 

connected directly to the storage array (in

‑band 

storage management), you must use the -n 

parameter if more than one storage array is 

connected to the host.

• If you manage a storage array through an 

Ethernet connection (out-of-band storage 

management), you must specify the 

host

‑name‑or‑IP‑address of the redundant array 

of independent disks (RAID) controller modules.

• If you have previously configured a storage 

array in the graphical user interface (GUI) of the 

MD Storage Manager, you can specify the 

storage array by its user

‑supplied name by 

using the -n parameter.

-A

Use to add a storage array to the configuration 
files. If you do not follow the -A parameter with a 
host

‑name‑or‑IP‑address, automatic discovery 

scans the local subnet for storage arrays.

-a

Use to add an SNMP trap destination or an e-mail 
address alert destination.
• When adding an SNMP trap destination, the 

SNMP community is automatically defined as 

the community name for the trap and the host 

is the IP address or Domain Name Server (DNS) 

host name of the system to which the trap 

should be sent.

• When adding an e-mail address for an alert 

destination, the email-address is the e-mail 

address to which to send the alert message.

21