DELL 34XX User Manual
Set Enclosure Attribute
Description
This command sets user-defined attributes for an enclosure.
Syntax
set enclosure [enclosureID] (chassisName | assetTag)= "userID"
Parameters
Parameter
Description
enclosureID
Identifies a specific enclosure for which to set the
attribute. Enclosure ID values are 0 to 99. You must
put brackets ([ ]) around the enclosure ID value.
attribute. Enclosure ID values are 0 to 99. You must
put brackets ([ ]) around the enclosure ID value.
chassisName
Chassis name or number to give the new
enclosure. Chassis names can be any combination
of alphanumeric characters with a maximum
length of 32 characters. Alphabetical characters
can be uppercase or lowercase. You can also use
the underscore character (_) and the hyphen (
enclosure. Chassis names can be any combination
of alphanumeric characters with a maximum
length of 32 characters. Alphabetical characters
can be uppercase or lowercase. You can also use
the underscore character (_) and the hyphen (
‑)
character. You cannot use spaces in a chassis
name. You must put quotation marks (" ") around
the chassis name.
name. You must put quotation marks (" ") around
the chassis name.
assetTag
Asset tag name or number to give the new
enclosure. Asset tags can be any combination of
alphanumeric characters with a maximum length
of ten characters. Alphabetical characters can be
uppercase or lowercase. You can also use the
underscore character (_) and the hyphen (
enclosure. Asset tags can be any combination of
alphanumeric characters with a maximum length
of ten characters. Alphabetical characters can be
uppercase or lowercase. You can also use the
underscore character (_) and the hyphen (
‑)
character. You cannot use spaces in an asset tag
name. You must put quotation marks (" ") around
the asset tag name.
name. You must put quotation marks (" ") around
the asset tag name.
Set Enclosure Identification
Description
This command sets the ID of an enclosure in a storage array.
Syntax
set enclosure ["Service Tag"] id=enclosureID
290