DELL 34XX User Manual

NOTE: Starting with firmware 8.10, some RAID controller modules no longer support the 
writeOrder parameter and the writeMode parameter.

Syntax

set remoteReplication (localVirtualDisk [virtualDiskName] | 

localVirtualDisks [virtualDiskName1 ... virtualDiskNameN]) 

[role=(primary | secondary)] 

[syncPriority=(highest | high | medium | low | lowest)] 

[autoResync=(enabled | disabled)] 

[writeOrder=(preserved | notPreserved)] 

[writeMode=(synchronous | asynchronous)] [force=(TRUE | FALSE)]

Parameters

Parameter

Description

localVirtualDisk

The name local virtual disk for which you want to 

define properties. Enclose the primary virtual disk 

name in square brackets ([ ]). If the primary virtual 

disk name has special characters or numbers, you 

must enclose the primary virtual disk name in 

double quotation marks (" ") inside square brackets.

localVirtualDisks

The names of several local virtual disks for which 

you want to define properties. Enter the names 

virtual disks using these rules:

• Enclose all names in square brackets ([ ]).
• Separate each names with a space.

If the virtual disk names have special characters or 

consist only of numbers, enter the names using 

these rules:
• Enclose all names in square brackets ([ ]).
• Enclose each names in double quotation marks 

(" ").

• Separate each names with a space.

role

The setting for the local virtual disk to act as the 

primary virtual disk or the secondary virtual disk. To 

define the virtual disk as the primary virtual disk, set 

this parameter to primary. To define the virtual 

disk as the secondary virtual disk, set this 

parameter to secondary. This parameter applies 

only when the virtual disk is part of a replication 

relationship.

syncPriority

The priority that full synchronization has relative to 

host I/O activity. Valid values are highest, high, 
medium, low, or lowest.

autoResync

The settings for automatic resynchronization 

between the primary virtual disks and the 

304