DELL 34XX User Manual

Page of 417
Parameters
Parameter
Description
diskGroup
Number of the disk group for which to display 
information. You must put brackets ([ ]) around the 
disk group number.
cancelImport
The setting to spin the physical disks back down 
after the disk group dependencies have been read. 
To spin down the physical disks, set this parameter 
to TRUE. To let the physical disks stay spinning, set 
this parameter to FALSE.
NOTE: This command returns the dependencies of a specific disk group, which must be in an 
Exported state or a Forced state. If a decision is made to retain the listed dependencies, then the 
cancelImport parameter can be enforced to spin the physical disks back down. You must run the 
show diskGroup importDependencies command before you run the start diskGroup 
import command.
Show Disk Pool
Description
This command returns information on the used and free capacity and other properties for the disk pool.
Syntax
show diskPool [diskPoolName]
Parameter
Parameter
Description
diskPool
The alphanumberic identifier of the disk pool 
(including – and _) that you want to set to a 
Complete state. Enclose the diskPoolName in 
square brackets ([ ]).
Show Host Ports
Description
For all HBA host ports connected to a storage array, this command returns the following information:
• HBA host port identifier
• HBA host port name
• HBA host type
344