DELL 34XX User Manual

Page of 417
Parameters
Parameter
Description
virtualDisk
Name of the virtual disk for which to start the 
formatting. You must put brackets ([ ]) around the 
virtual disk name. If the virtual disk name has 
special characters, you must also put quotation 
marks (" ") around the virtual disk name.
Stop Configuration Database Diagnostic
Description
This command stops the diagnostic test to validate the configuration database in the RAID controller 
module firmware that was started by the start storageArray configDbDiagnostic command.
Syntax
Stop storageArray configDbDiagnostic
Parameters
None.
NOTE: The RAID controller module firmware returns a confirmation that the diagnostic test was 
cancelled. In addition, the database configuration diagnostic test can be started through the storage 
management software GUI but cannot be stopped through the storage management software GUI. 
If you want to stop a running diagnostic test, you must use the stop storageArray 
configDbDiagnostic command.
Stop Consistency Group Snapshot Rollback
Description
This command stops a rollback operation to the member base virtual disks in a snapshot consistency 
group that was initiated by the start rollback cgSnap command.
NOTE: Canceling a consistency group snapshot rollback operation leaves the base virtual disk in an 
indeterminate state with potentially invalid or inconsistent data. The related consistency group 
snapshot virtual disk becomes disabled and unusable.
Syntax
stop cgSnapImage ["snapCGID:imageID"] | rollback [memberVirtualDiskSet 
["memberVirtualDiskName1' ... "memberVirtualDiskNamen"] ] 
393