DELL 32XX User Manual

Parameters

Parameter

Description

allVirtualDisks

Deletes all virtual disks in a storage array.

NOTE: Using the allVirtualDisks 
parameter deletes virtual disks until all are 
removed or until an error is encountered. If an 
error is encountered, this command does not 
attempt to delete the remaining virtual disks.

virtualDisk or virtualDisks

Name of the virtual disk to delete. You can enter 
more than one virtual disk name. You must put 
brackets ([ ]) around the virtual disk name. If the 
virtual disk name has special characters, you must 
also put quotation marks (" ") around the virtual 
disk name.

removeDiskGroup 

Deleting the last virtual disk in a disk group does 
not delete the disk group. You can have a 
standalone disk group (minus any virtual disks). To 
remove the standalone disk group, set this 
parameter to TRUE. To keep standalone disk 
groups intact, set this parameter to FALSE.

schedule

Deletes only the schedule.

Delete Virtual Disk On A Disk Pool

Description

This command deletes either normal or thin virtual disks on a disk pool.

CAUTION: All of the data in the virtual disk is lost as soon as you run this command.

Syntax

delete (allVirtualDisks |

virtualDisk [virtualDiskName] |

virtualDisks [virtualDiskName1 ... virtualDiskNameN] | allVirtual disks)

[removeDiskGroup=(TRUE | FALSE)

retainRepositoryMembers=(TRUE | FALSE)]

force=(TRUE | FALSE)

schedule

retainRepositoryMembers=(TRUE | FALSE)]

214