DELL 32XX User Manual

Start Input Output RAID Controller Module (IOC) Dump

Description

This command produces a dump of the IOC log of data transmissions between a host and a RAID 
controller module. RAID Controller Modules are identified as "0" or "1". Each RAID controller module can 
have up to four host channels, each channel is uniquely identified by a number from 1 through 4.

Syntax

start IOCLog [(0,1 | 0,2 | 1,1 | 1,2)] [overwrite=(TRUE | FALSE)]

Parameters

Parameter

Description

RAID controller module-channel identifiers

This parameter specifies the RAID controller 

module and host channel from which to produce 

the IOC dump. Valid RAID controller module 

identifiers are 0 or 1. Enclose the RAID controller 

module identifier and host channel identifier in 

square brackets ([ ]).

Valid RAID controller module identifier and host 

channel values are 0,1, 0,2, 1,1, 1,2, .

If you do not specify a RAID controller module, the 

MD storage management software returns a syntax 

error.

overwrite

This parameter causes the new IOC log dump to 

overwrite an existing dump. To overwrite the 

existing dump, set this parameter to TRUE. The 

default value is FALSE.

NOTE: This command generates a debug log from the IOC of the selected RAID controller module 
and stores the data in a compressed format in a persistent memory buffer on the RAID controller 
module. You can retrieve the data from the debug log using the save IOCLog command. The RAID 
controller module returns an error for these conditions:
The RAID controller module platform and HIC do not support an IOC dump.

The specified RAID controller module has an outstanding IOC dump and the overwrite parameter is 
false.

The specified controller identifier or channel identifier are out of the valid range

Start iSCSI DHCP Refresh

Syntax

start controller [(0 | 1)] iscsiHostPort [(1 | 2 | 3 | 4)] dhcpRefresh

383