Elsa 22H99 User Manual

Among other things it is possible to configure the monitor conveniently via software.  A
program with which you can configure the main display settings directly is included with
your ELSA monitor.

When you insert the supplied CD, the ELSA setup program usually starts up automati-
cally.  After you have specified the monitor type, you can select the component to be
installed in the list and click on Install.

If the program does not automatically start after the CD is inserted, you should run it man-
ually.  Select the CD drive in Explorer and start the CDSETUP.EXE program in the root
directory of the CD.

After the installation you will find the USB monitor in the Control Panel under Display
Properties.  Select Start 

왘

 Settings 

왘

 Control Panel and start the Display program.

In the 'Display Properties' dialog box you will find the 'ECOMO 22H99 USB Monitor' tab.  

Configuration using sliders is easy and intuitive.  The resulting effects are displayed
immediately. 

If you want to make display corrections in small increments you can use the arrow keys
(a) instead of the mouse to change the values gradually.

Feel free to experiment and try out the different possibilities.  The settings are only saved
when you confirm them by pressing Apply or OK.

Increased clarity with tabs for each 
individual display setting

Various test patterns and colors facilitate 
monitor setup

Values are easy to set with sliders