Elsa 22H99 User Manual

Page of 44
Introduction
ELSA ECOMO 22H99
1
Introduction
This manual tells you how to connect, adjust and care for your monitor.  This manual also
provides technical specifications and instructions for troubleshooting problems you may
experience with your monitor.
Monitor features
The Diamond monitor is an intelligent, microprocessor-based monitor compatible with
most analog RGB (red, green, blue) display standards, including PS/V
®
, PS/2
®
, Apple
®
Macintosh
®
, Centris, Quadra, Macintosh II and Power Macintosh products.  
It provides crisp text and vivid color graphics with VGA, SVGA, XGA (non-interlaced), and
most Macintosh compatible color graphics boards.
쮿
The monitor’s wide auto-scanning compatibility range makes it possible to upgrade
graphics boards or software without needing to purchase a new monitor.
쮿
Digitally controlled auto-scanning is done using an internal microprocessor, for
horizontal scan frequencies between 30kHz and 121kHz, and vertical scan frequen-
cies between 50Hz and 160Hz.  The microprocessor-based intelligence allows the
monitor to operate in each frequency mode with the precision of a fixed frequency
monitor.
쮿
The monitor contains resident memory for pre-programmed screen display stan-
dards and is also capable of storing additional user adjustment parameters.
쮿
The monitor is capable of producing a non-interlaced maximum addressable resolu-
tion format of 1800 dots x 1440 lines.  This display is well suited for windowing envi-
ronments.
쮿
Because of the analog signal inputs, the monitor can display an unlimited palette of
colors that can be manually adjusted to suit your specific needs.
쮿
The monitor has a power management function according to VESA
TM
-DPMS
TM
 stan-
dard.  To save energy, the monitor must be connected to a system compliant with
this standard.  (Refer to your computer and/or graphics board instructions for proper
operation.)
쮿
To ensure the easy installation and operation of this monitor, an on-screen display
(OSD) presents all of the functions for setup and adjustment.
쮿
The monitor complies with the safety standards UL 1950, CSA C22.2 No.950 and
EN60950; FCC Class-B, VCCI Class-B and EN55022 Class-B for EMI; MPR-II; and with