Sharp AR-152E User Manual
23
5
6
Close the front cover and
then the side cover by
pressing the round
projections near the side
cover open button. The
indicator will go out and the
start (
then the side cover by
pressing the round
projections near the side
cover open button. The
indicator will go out and the
start (
) indicator will light
up.
TONER CARTRIDGE LIFE
To find out the approximate quantity of toner remaining, follow the procedure
described below.
described below.
1
Press and hold down the light (
) and dark (
) keys
simultaneously for more than 5 seconds until all the alarm
indicators (
indicators (
,
,
,
) blink and "
" appears in the
display.
2
Press and hold down the copy ratio display
(%)
key for more thn
5 seconds.
The approximate quantity of toner remaining will be indicated in the display
as a percentage ("100", "75", "50", "25" or "10" is displayed). When the
percentage is less than 10%,
as a percentage ("100", "75", "50", "25" or "10" is displayed). When the
percentage is less than 10%,
(
)
will be displayed.
3
Press the light (
) or dark (
) key.
All alarm indicators wil go out.
When closing the covers,
be sure to close the front
cover securely and then
close the side cover. If the
covers are closed in the
wrong order, the covers
may be damaged.
be sure to close the front
cover securely and then
close the side cover. If the
covers are closed in the
wrong order, the covers
may be damaged.
Even after a new toner cartridge is installed, the start (
) indicator
may not light up, indicating copying cannot be restarted (toner is not
sufficiently fed). In this case, open and close the side cover. The
copier will feed toner again approximately 2 minutes and then
copying can be restarted.
sufficiently fed). In this case, open and close the side cover. The
copier will feed toner again approximately 2 minutes and then
copying can be restarted.