Marantz VP-12S3/VP-12S3L User Manual

Page of 50
ENGLISH
33
Lamp Life
Display the remaining lamp life by pressing the 
INFO.
button on the remote controller.
Notes:
• The maximum life limit of the lamp is 2,000 hours. Although we care very much about quality, the lamp can rarely breaks down if
running time exceeds 1,000 hours. Therefore we recommend to replace the lamp if Lamp Life gets under 1,000 hours. The lamp
cannot be used exceeding the maximum life limit.
• This product is checked under strict quality control when it is shipped out form factory.
“Total Hours” in the menu includes the time for this check. So “Total Hours” may not be 0 hours when it is used first time.
– When the lamp life becomes less than 100 hours and the unit is still on, the remaining lamp life is displayed on the screen
automatically.
– When the lamp life becomes less than 5 hours, the remaining lamp life is displayed on the screen .
To clear the warning, press the 
MENU
button.
– Approximately 2 minutes after the lamp reaches the end of its lamp life, power to the projector shuts OFF and the WARNING
indicator lights up a red color. If the below message appears on the screen and power shuts OFF soon thereafter, promptly
replace the lamp with a new one. (See “Replacing Lamp Unit” 
P.34)
Lamp Life 0 Hours
Warning
PATT.
MENU
V-MUTE
ENTER
PATTERN
STANDBY
POWER ON
Lamp Life 5 Hours
Warning
Warning
Lamp Life 100 Hours
S-VIDEO
VIDEO
RGB
AUX
DYNA.
USER
CINEMA
ZOOM
THROUGH
INFO
LIGHT
Video Input
Information
Component-1080i
Preset
User A1
Gamma
A
Cinema Mode
Auto
Aspect
Normal
Trigger 2
On
Lamp Life
921 Hours
Total Hours
3653 Hours
Lamp Life and Replace Lamp
MAINTENANCE