Marantz VP-12S3/VP-12S3L User Manual

There is potential glass particle hazard if the lamp ruptures.

There is a potential hazard of glass particle if the lamp ruptures.
In case of lamp rupture,contact your nearest Marantz Authorized Dealer or Service Center for a replacement.
See “Replacing Lamp Unit”. (

☞

P.34)

For minimal servicing and to maintain high image quality, avoid humidity,
dust and cigarette smoke.
When the projector is subjected to these environments,the lens and
part of ventilation holes must be cleaned more often than usual. As long
as the projector is properly maintained in this manner, use in these
environments will not reduce the overall operation life. Please note that
all internal cleaning must be performed by an Marantz Authorized
Dealer, or Service Center.

• Do not expose the projector to extreme heat or cold.

Operating temperature:41 °F to 95 °F (+5 °C to 35 °C)
Storage temperature:–4 °F to 140 °F (–20 °C to +60 °C)

• The exhaust ventilative hole, the lamp cage cover and adjacent

areas may get extremely hot during projector operation. To
prevent injury,do not touch these areas until they have sufficiently
cooled down.

• Allow at least 1 foot (30 cm)of space between the exhaust

ventilative hole and the nearest wall or obstruction.

• If the cooling fan becomes obstructed, a protection device will

automatically turn off the projector lamp. This does not indicate a
malfunction. Remove the projector power cord from the wall outlet
and wait at least 10 minutes.
Then turn on the power by plugging the power cord back in. This
will return the projector to the normal operating condition.

MODEL NO. VP-16S1 / U1M

AC 120V   60HZ   2.0A

SERIAL NO.

M

MODEL NO. VP-12S1 / N1S

MADE IN JAPAN

FABRIQUE AU JAPON

AC 120V   60H

Z 

  2.0W

SERIAL NO.

95˚F
(+35˚C)

41˚F
(+5˚C)