Garmin Flight Deck 100 User Manual
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
146
AUDIO PANEL AND CNS
ADF/DME TUNING
NOTE:
When another auxiliary window is turned on, the ADF/DME Tuning Window is replaced on the PFD.
See the Flight Instruments Section for displaying the DME and bearing information windows (ADF) and
using the ADF as the source for the bearing pointer.
The system tunes the optional ADF receiver and DME transceiver. The ADF is tuned by entering the frequency
in the ADF standby frequency field of the ADF/DME Tuning Window. (The softkey may be labeled ADF/DME
or DME, depending on installed equipment.)
or DME, depending on installed equipment.)
The UHF DME frequency is tuned by pairing with a VHF NAV frequency. DME frequency pairing is automatic
and only the VHF NAV frequency is shown.
The following ADF/DME information is displayed in the ADF/DME Tuning Window:
• Active and standby ADF frequencies
• ADF receiver mode
• DME tuning mode (DME transceiver pairing)
When the ADF/DME Tuning Window is displayed, the selection cursor is placed over the standby ADF
frequency field.
Turning the large FMS Knob moves the selection cursor through the various fields (standby ADF frequency,
ADF receiver mode, and DME tuning mode). Pressing the FMS Knob activates/deactivates the selection cursor
in the ADF/DME Tuning Window. The ADF frequency is entered using the FMS Knob and the ENT Key.
in the ADF/DME Tuning Window. The ADF frequency is entered using the FMS Knob and the ENT Key.
Figure 4-29 ADF/DME Tuning Window
Active ADF Frequency
Standby ADF Frequency
ADF
Mode
DME
Tuning
Mode