Garmin Flight Deck 100 User Manual
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
459
AUTOMATIC FLIGHT CONTROL SYSTEM
FLIGHT LEVEL CHANGE MODE (FLC)
NOTE:
The Selected Altitude should be set before selecting Flight Level Change Mode.
Flight Level Change Mode is selected by pressing the FLC Key. This mode acquires and maintains the
Airspeed Reference (in IAS or Mach) while climbing or descending to the Selected Altitude (shown above
the Altimeter). When Flight Level Change Mode is active, the flight director continuously monitors Selected
Altitude, airspeed, Mach, and altitude.
the Altimeter). When Flight Level Change Mode is active, the flight director continuously monitors Selected
Altitude, airspeed, Mach, and altitude.
The Airspeed Reference is set to the current airspeed upon mode activation. Flight Level Change Mode
is indicated by a green ‘FLC’ annunciation in the AFCS Status Box. The Airspeed Reference is displayed
directly above the Airspeed Indicator, along with a cyan Airspeed Reference Bug corresponding to the Airspeed
Reference along the tape.
directly above the Airspeed Indicator, along with a cyan Airspeed Reference Bug corresponding to the Airspeed
Reference along the tape.
Engine power must be adjusted to allow the autopilot to fly the aircraft at a pitch attitude corresponding
to the desired flight profile (climb or descent) while maintaining the Airspeed Reference. The flight director
maintains the current altitude until either engine power or the Airspeed Reference are adjusted and does not
allow the aircraft to climb or descend away from the Selected Altitude.
maintains the current altitude until either engine power or the Airspeed Reference are adjusted and does not
allow the aircraft to climb or descend away from the Selected Altitude.
Figure 7-11 Flight Level Change Mode (IAS)
Airspeed
Reference
Bug
Airspeed
Reference
Selected Altitude
Capture Mode Armed
Flight Level Change
Mode Active
Command Bars Indicate Climb
to Attain Selected Altitude