Graco SDM5 User Manual

D. Information Banner: Configurable information 
banner. Data is input in Setup Mode, Banner Screen, 
page 19.

E. Unit of Measurement: Identifies unit of 
measurement, pint, quart, gallon or liter. Unit is selected 
in Setup Mode, Units/Limit Screen, page 15.

F. Home Icon: Returns user to Home Screen.

G. Reset: Resets counter (H) to zero.

H. Counter: Before dispense has begun, display reads 
0.00. As fluid is dispensed, counts up from zero. At the 
same time the Progression Bar (J) displays a real-time, 
visual representation of the progress made toward 
completing the dispense.

J. Progression Bar: Displays a real-time, visual 
representation of the progress made toward completing 
the dispense. Runs in conjunction with Counter (H). 

For example, in F

IG

. 22, a partial dispense of 2.5 quarts 

of the total Preset Dispense of 5.0 quarts is shown. The 
Progression Bar shows that approximately half the 
dispense is complete. 

Use the UP or DOWN ARROW to 

select field L on the task bar. 

a.

Use the UP or DOWN ARROWS to scroll 
through the 3 available Preset Quantities (L). 
Each time you press the UP or DOWN 
ARROWS, one of the 3 preset amounts dis-
plays on the task bar in field L. 

b. When the Preset Quantity you want to dispense 

is shown in field L, press the center, ENTER 
button to select it. 

MOBIL1 5W-20

2.50

QTS

4.0

E

F

G

H

D

J

L

ti122410a

If a suitable preset quantity is not available, select 
an amount that is closest to the amount you want to 
dispense. Amounts can be modified following the 
procedure described on page 23.