Sony Ericsson HBM-30 User Manual

Transferring the sound
Depending on the type of phone, you can transfer the 
sound to the HBM-30 during a call. 
The HBM-30 has to be on, paired with the phone, 
and within range.

To transfer the sound to the HBM-30
During a call, press and hold 

. The HBM-30 

beeps until the sound has been transferred.

Note: To transfer the sound from the HBM-30 to the 
phone, refer to the phone’s user documentation.

Muting the microphone
You can mute the microphone during a call.

• Press both 

 and 

. A repeated beep is heard 

while the microphone is muted.

• Press and release both 

 and 

 again to resume 

the conversation.

No sound contact between HBM-30 
and phone
The phone has to:
• be paired with the HBM-30.
• be within range of the HBM-30. Make sure that 

there are no solid objects, such as walls or 
furniture, in between the HBM-30 and the phone. 
See picture “2.” on page 5.

• support the Headset or the Handsfree profile.
• have Bluetooth operation mode set to On.

Note: If the HBM-30 has been in pairing mode for 
more than 10 minutes but pairing is not completed, 
the HBM-30 leaves the pairing mode and the 
Bluetooth function can not be used until you pair the 
HBM-30 with your phone (see page 9).

• The battery power may be too low. Insert a new 

battery. After switching the HBM-30 off, wait for 2 
seconds or more before switching it on again.

• Check correct orientation of your battery.