Epson 1200U User Manual

61

Using the Transparency Unit

Loading Transparencies

Before scanning transparencies, wipe the 

lid of the transparency unit, the scanner’s 

document table glass, and the narrow 

window near the hinges. Be sure to keep 

the window uncovered when loading your 

transparencies. If your transparency 

obstructs the window, the colors in your 

scans will be affected.
You can load transparencies in the film 

holders or you can place them directly on 

the document table, as described in the 

following sections.

Using Film Holders
Three film holders are included with the transparency unit. To place film in the 

holders, see the instructions for the type of film you’re scanning. To remove a film 

holder from the document table, lift it out by its tab.

Hold the film by the edges or use gloves. Touching the film 

surface with bare hands can leave fingerprints or other marks 

on the film.

Placing the Film
Film has two sides, a base side that is shiny and a dull side with the emulsion. The 

base side of the film has the film maker’s name and film ID numbers printed on it.
Film should always be loaded in the film holders or placed on the document table 

with the base side down.

window

lid