Epson 1200U User Manual

Page of 113
83
4. If paper is still jammed inside the 
mechanism, open the cover to 
remove it.
5. After removing jammed paper, 
make sure that the cover is closed, 
and push the feeder mechanism 
down until it clicks into place.
Software Problems
If you can’t open the EPSON 
TWAIN driver . . .
Check the USB cable connection. 
Also, make sure the scanner’s 
operate light is on. The scanner 
must be turned on before you 
start your computer. If necessary, 
turn on the scanner and restart 
your computer.
Check that your system 
recognizes your scanner. Check 
System Device Manager in the 
Windows Control Panel.
ADF cover
Check your scanner source 
setting. Make sure you selected 
EPSON TWAIN 4(32-bit)
 
(Windows) or 
EPSON TWAIN 4
 
(Macintosh).
If the scanner software doesn’t 
work properly . . .
Make sure your computer meets 
the system requirements listed on 
pages 4 and 5, and supports any 
software applications you are 
using.
Check your computer’s memory. 
See if the computer has enough 
memory for your software. If 
you’re running other software at 
the same time, using RAM 
resident programs, or have many 
device drivers, the computer may 
not have enough memory. (See 
your software and computer 
manuals.) If you are scanning a 
large image or scanning at a high 
resolution, your computer may 
not have enough memory to 
process the image.
Check your software installation. 
Make sure that your software is 
correctly installed and set up. If 
all else fails, uninstall your 
software, then reinstall it, as 
described on the next page.